开云体育

Sorry about the delayed response, I wasn't set up to get notifications for follow up posts. So the basic trick is to make a disc image of the MMS drive on another computer. I used Paragon Backup &

I've seen several cases lately where ReportCresnet can find all the devices and SimplDebugger reports all the logic is working, but the actually Cresnet endpoint doesn't do anything. Kind of like

Good to know!!? Cheers.

LLDP is coming on a firmware later this summer. Nate Lundquist

Takeover job, for whatever reason the keypads on this particular lighting system are only flashing their feedback off and on a few times and not triggering the programming attached to them.? Cresnet

Hi All, Just wondering if NVX devices support LLDP reporting?? Had a quick look through simpl and could not see anything.? Have a job at the moment with a whole heap of removable roadcases with an

Seconded Jeremy's suggestion.? Most integrators I work with use gift cards and have client create account (I do commercial vs resi), but this way they can use whatever account they want.? And this

Several people here have recommended an iTunes $100 gift card as the easiest way to purchase the app -- that way you can put it on any account they want, and you reduce the risk of the account being

This doesn't directly answer your request, but I want to take the opportunity to promote my buddy, Dave Tkachuk's VISIO engineering frame-work, Engeering Complete AV (ECAV). Dave is an industry

I believe you have to manually clear the NONVOLATILE memory separately from toolbox.? If you did that it would probably fix what you are seeing. The way I've seen this done before (program I didn't

I simply make my own and that way I can properly incorporate all of the detail and ports I choose.

Hi! I tried with http://user:password@IP/cgi-bin/mjpg/video.cgi? ( http://user:password@IP/cgi-bin/mjpg/video.cgi ) in MJPEG and can get the streaming, but is so slow. It's refreshing every

Do a search on Crestron help. I know they have ACAD blocks, I think I saw Visio also.

Thank you all for the help. I was able to achieve the IP ID remapping. But i have issue with looping when i am restarting the program after all IP ID's are set. What is happening here is that, once

I have only been able to find decent paid stencil from Netzoom.? ?They are expensive, but very good quality and they will add something if they don't have it.

Hello, Controlling 3 TV's Via IR.? Was attempting to send the same command to all three TV's and have an interlock which shows which tv is selected.? I attach the IL to the enable on the IR device

Is anyone still using Visio 2016 and if so what Crestron stencils are you using, free or paid?

Hey Matt, FYI, I sent you a response to you the email you sent last Sunday, but didn't hear a confirmation (possibly due to the internals of this group??). Just wanted to see it you were able to get

Is this for electric or for wet Matt? We had this on a property with wet UFH but it was made worse by the client having timber floors where the guarantee would be voided if the floor temp went over 28

For residential clients, use the tablet of their preference,? Either Android or Apple.? I like using iPads with the Launchport to really keep the setup clean in both residential and commercial