开云体育

Are you transmitting or receiving on the Pro3 side?

Seriously.... What the hell Crestron!? Thanks for headsup

Tech support told me to roll back to SIMPL 4.11.06 because of issues I was having compiling. Apparently newer SIMPL is only meant for programming 4-series at the moment. Newer versions of SIMPL gave

With respect to the sACN, we just cannot get this to work. I am using the Crestron sACN module and this is how we have it connected. Pro3 Subnet port to port 2 on the Ion Xe RPU. We have the Ion Xe

Perfect. Thank you

There's a roomview connected display module if that's what you're after? wrote:

Is there a Crestron Connected symbol or module in SIMPL Windows? I only see Crestron Connected AVR. Thank you

No problem! Glad its working. OSC has some complications once it gets down to blobs. I know it would need to be implemented in C# as it gets pretty intense. Certainly willing to work on it if you

I know this is thread is from 2019, but I'm just wrapping up a project with (12) DIN-THSTATS and honestly this could be the last straw for me and Crestron. Since 2003 I've been doing TSTAT/HVAC pretty

Pretty certain there is no control at all (RS232 or LAN) of the hub 2, and according to MS, not on the roadmap either

Has anyone controlled a Surface Hub 2S?? The original surface hub had a RJ11 serial port on it, that allowed control, (I've done it before and know it worked).? The newer 2S versions say they also

RK thank you for confirming what I thought to be true.? The PM and field tech spoke with TrueBlue and were told that they needed Fusion to use the Occ Sensor.? The engineer and I didn't believe that

Don't know but that would be a fantastic feature!! G-search seemed to indicate that you used to be able to use 'remote://' but that it no longer works. Would love it if there was a reliable way to do

Hey Ryan, Well, you are a genius!!!? We used the UDP instead and we are Live!!!!? Thank you so much!? On a different note, do you by chance know what port I would use for the sACN function?

Hey Ryan, Thank you so much, I spent a whole day with ETC's tech support and they didnt seem to know this.? Do you by chance, have a module that will produce the opensoundcontrol strings?? I would

We are seeing the error on the EOS side. I am not there yet but when I get there I will send the log. Every time I send the command, this is what it replies with. 00:00:39.312: lighting_EOS_tx$ ->

Where are you seeing the packet too large error? On the EOS side in the log? Can you send the logfile from EOS? wrote:

The TSS can deal with the Occupancy directly and cancel on a no show. But its limited to just some basic options. You simply configure this on the panels webserver. If you want to use sensor in room

I’m assuming given the formatting you are sending this as if it’s an OSC packet to the OSC input on the EOS. OSC is a protocol spec that is fairly in-depth unfortunately just sending that as a

Has anyone out there interfaced a Crestron with an ETC EOS system?? The RPU that we have is the Ion Xe.? We are on a job and it keeps telling us that the packet is too large. I have a single TCP/IP