Re: LG Video Wall

[email protected]

Any luck getting the codes to work? I had to stab at codes to get a dvi input code and the tile codes aren't adding up.

Re: Rava built in sound files?

Heather Baiman

#211101

I asked Crestron for the files awhile back. To stop the default ring, type SIPDEFAULTRING OFF in console.  To ring your own files you'll have to drive them with either reserved or assignable joins in VT-Pro.

________________________________
From: Crestron@... [Crestron@...]
Sent: Sunday, February 07, 2016 5:47 PM
To: Crestron@...
Subject: Re: [Crestron] Rava built in sound files?

Hello

Can I ask how you got the ringing sound files off the TSW? Are they in a an FTP folder?

Secondly, do you know if you can change the default ringing sound files on the panel to something different?

Thanks

J
On 7 Feb 2016, at 19:42, Heather Baiman heather@...<mailto:heather@...> [Crestron] <Crestron@...<mailto:Crestron@...>> wrote:

Just sent them to you.
________________________________
From: Crestron@...<mailto:Crestron@...> [Crestron@...<mailto:Crestron@...>]
Sent: Sunday, February 07, 2016 2:10 PM
To: Crestron@...<mailto:Crestron@...>
Subject: [Crestron] Rava built in sound files?

Does anybody have the files that are built into a TSW panel for the Rava intercom? I need to use the same ringing sounds to feed into a sound system via an MP3 player.

============================================================================
Please refer to 
for important disclosures regarding this electronic communication.
============================================================================

------------------------------------

------------------------------------

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.

------------------------------------

Yahoo Groups Links

============================================================================
Please refer to 
for important disclosures regarding this electronic communication.
============================================================================

Re: Rava built in sound files?

Code radio

#211100

开云体育

Hello

Can I ask how you got the ringing sound files off the TSW? Are they in a an FTP folder?

Secondly, do you know if you can change the default ringing sound files on the panel to something different?

Thanks

J

Show quoted text

On 7 Feb 2016, at 19:42, Heather Baiman heather@... [Crestron] <Crestron@...> wrote:

Just sent them to you.
________________________________
From: Crestron@... [Crestron@...]
Sent: Sunday, February 07, 2016 2:10 PM
To: Crestron@...
Subject: [Crestron] Rava built in sound files?

Does anybody have the files that are built into a TSW panel for the Rava intercom? I need to use the same ringing sounds to feed into a sound system via an MP3 player.

============================================================================
Please refer to
for important disclosures regarding this electronic communication.
============================================================================

------------------------------------

------------------------------------

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.

------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
???

<*> Your email settings:
???Individual Email | Traditional

<*> To change settings online go to:
???
???(Yahoo! ID required)

<*> To change settings via email:
???Crestron-digest@...
???Crestron-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
???Crestron-unsubscribe@...

<*> Your use of Yahoo Groups is subject to:
???

Re: Dsc Power series and IT-100 no communication from either direction

#211099

开云体育

Have you tried a new IT-100? ?This is our setup of choice and the few times this has happened to us, it's been the it-100?

Thank you,

Trey Chamrad - Texas Audio Video Integration

3217 Ranch Road?620 N.?|?Austin, TX 78734

1965 Post Road?#502?|?New Braunfels, TX 78130

855.55.TUNES?(855-558-8637)

512.771.9183?cell?|?512.386.1303?office fax

"control your home & business."

6s+, please excuse typos.

Show quoted text

On Feb 7, 2016, at 2:31 PM, dave.dunaway@... [Crestron] <Crestron@...> wrote:

?

Hey Yall. I have a client that has an mc3 talking to a dsc power series panel through an it-100.

the system was working fine up until about a year ago when the link between the processor and the panel just didnt work any more.?

As of this moment, i get no serial data out of the crestron module using keypad button presses or the init function. I also get no data from the security panel using the crestron processor or with pc interface.?

Cabling has been verified a dozen times and im dead in the water,?
Has anyone had an issue with this module not functioning and is there a secret handshake between the it-100 and its 232 companion that starts comm.?

I am not a security installer, so be gentle with that judgement.?

Re: Denon AVR4806 control via ethernet

#211103

You probably need to plug in the video cable to a TV to see the network settings. Definitely need a TCP/IP client, IP, as well as the port (probably 23). Good luck!

On Feb 6, 2016 3:20 PM, "bdige@... [Crestron]" <Crestron@...> wrote:

Show quoted text

?

Hi,

I would like to use the Ethernet port on the back of my AVR4806 for control.? Here is my question...

Do I need to set an IP address in the TC/IP client, I am sure that I do :)?? If so, does anyone know how to access the network settings inside the AVR4806?? I do not know the IP address assigned to the unit when I connected it to my router.? I am striking out all over the place.?

This is the only thing I can find on the 4806 beside the manual.? The manual looks like the network manual is only on the 58 series.

NETWORK SETUP of AVR-4806/AVC-A11XV >Procedure of Network Setup mode. (1)Push the POWER switch during STANDARD button and INPUT MODE button press simultaneously.

Preview by Yahoo

Thank you for the help.

B

Dsc Power series and IT-100 no communication from either direction

[email protected]

#211098

Hey Yall. I have a client that has an mc3 talking to a dsc power series panel through an it-100.

the system was working fine up until about a year ago when the link between the processor and the panel just didnt work any more.?

As of this moment, i get no serial data out of the crestron module using keypad button presses or the init function. I also get no data from the security panel using the crestron processor or with pc interface.?

Cabling has been verified a dozen times and im dead in the water,?

Has anyone had an issue with this module not functioning and is there a secret handshake between the it-100 and its 232 companion that starts comm.?

I am not a security installer, so be gentle with that judgement.?

Re: Rava built in sound files?

Kalidas

#211097

Please send the same files to me. Thank you

"Whatever doesn't kill you, it's simply makes you stronger"

Show quoted text

On 8 Feb 2016, at 3:42 AM, Heather Baiman heather@... [Crestron] <Crestron@...> wrote:

Just sent them to you.
________________________________
From: Crestron@... [Crestron@...]
Sent: Sunday, February 07, 2016 2:10 PM
To: Crestron@...
Subject: [Crestron] Rava built in sound files?

Does anybody have the files that are built into a TSW panel for the Rava intercom? I need to use the same ringing sounds to feed into a sound system via an MP3 player.

============================================================================
Please refer to 
for important disclosures regarding this electronic communication.
============================================================================

------------------------------------

------------------------------------

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.

------------------------------------

Yahoo Groups Links

Re: DM-MD8x8 Error message

Adonai Da Silva

#211096

All my displays arr HDCP complient. Have you seen this error message before?

Show quoted text

On Friday, February 5, 2016, 6:35 PM, jonathany126@... [Crestron] wrote:

?

Are the displays or ?projectors HDCP compliant?

Re: Rava built in sound files?

#211095

Thanks

Re: Rava built in sound files?

Heather Baiman

#211094

Just sent them to you.
________________________________
From: Crestron@... [Crestron@...]
Sent: Sunday, February 07, 2016 2:10 PM
To: Crestron@...
Subject: [Crestron] Rava built in sound files?

Does anybody have the files that are built into a TSW panel for the Rava intercom? I need to use the same ringing sounds to feed into a sound system via an MP3 player.

============================================================================
Please refer to 
for important disclosures regarding this electronic communication.
============================================================================

Rava built in sound files?

#211093

Does anybody have the files that are built into a TSW panel for the Rava intercom? I need to use the same ringing sounds to feed into a sound system via an MP3 player.

Re: Denon AVR4806 control via ethernet

Michael S. Moran

#211092

Inital Setup Menu.

Do note that these images are from a AVR 4520CI and will look slightly different but the process is the same.

Here is where you set the Network to be "Always ON"

Here is where you check for Firmware updates.

Good Luck.........

msm

From: Crestron@... [mailto:Crestron@...]

Sent: Sunday, February 07, 2016 12:28 PM
To: Crestron@...
Subject: RE: [Crestron] Re: Denon AVR4806 control via ethernet

All firmware is loaded via the web interface, which, again resides under "Network" i the menu structure.

Use the Denon supplied remote control, enter "Setup"...scroll to Network or perhaps Network Settings.  First, look at the "Info" section and it should reveal your current IP address and if you are actually "connected".  I would urge you to set the unit up as "Static" so that you will always know where the Denon AVR lives on the network.

Next, peruse the Network area and you should see "Check for Update".  Hitting the Enter button will instruct the unit to connect to Denon's Server and look for updates.  If it finds Updates, you should run them.  Some can take as long as 40-50 minutes but this is impacted by the network speed and if there is more than one update available.  DO NOT Run an update if you have any concerns about the robustness of the LAN or if your could experience a power outage.  Do note that each new iteration of Denon's receiver's will look slightly different from a programming perspective.

One further must do, make sure the IP is set to be always ON...not the Energy Saving Mode.

Feel free to contact me if you have more issues.

Mike Moran

561.391.1843

From: Crestron@... <mailto:Crestron@...>  [mailto:Crestron@...]
Sent: Saturday, February 06, 2016 7:56 PM
To: Crestron@... <mailto:Crestron@...>
Subject: [Crestron] Re: Denon AVR4806 control via ethernet

Thanks for the response.  No matter what I do I cannot get a web menu (Denon does not offer ffirmware for this model on their website, I fell the web browser is not capable with this model).  I was able to get the network menu to be active.  I followed Denon's instructions but it took around six tries before I was successful.

The client now shows online.

Only if there is a way to control a non jailbroken apple tv through ethernet.

[Non-text portions of this message have been removed]

Re: Denon AVR4806 control via ethernet

Michael S. Moran

#211091

开云体育

All firmware is loaded via the web interface, which, again resides under "Network" i the menu structure.

?

Use the Denon supplied remote control, enter "Setup"...scroll to Network or perhaps Network Settings.? First, look at the "Info" section and it should reveal your current IP address and if you are actually "connected".? I would urge you to set the unit up as "Static" so that you will always know where the Denon AVR lives on the network.

?

Next, peruse the Network area and you should see "Check for Update".? Hitting the Enter button will instruct the unit to connect to Denon's Server and look for updates.? If it finds Updates, you should run them.? Some can take as long as 40-50 minutes but this is impacted by the network speed and if there is more than one update available.? DO NOT Run an update if you have any concerns about the robustness of the LAN or if your could experience a power outage.? Do note that each new iteration of Denon's receiver's will look slightly different from a programming perspective.

?

One further must do, make sure the IP is set to be always ON...not the Energy Saving Mode.

?

Feel free to contact me if you have more issues.

?

Mike Moran

561.391.1843?

?

Show quoted text

From: Crestron@... [mailto:Crestron@...]
Sent: Saturday, February 06, 2016 7:56 PM
To: Crestron@...
Subject: [Crestron] Re: Denon AVR4806 control via ethernet

?

Thanks for the response.? No matter what I do I cannot get a web menu (Denon does not offer ffirmware for this model on their website, I fell the web browser is not capable with this model).? I was able to get the network menu to be active.? I followed Denon's instructions but it took around six tries before I was successful.

The client now shows online.

Only if there is a way to control a non jailbroken apple tv through ethernet.

Re: Access to Labs

#211090

How long did it take you?

Need SIMPL windows module for Extron AVT 100N

#211102

Hi

I am new here, i want SIMPL windows module for Extron AVT 100N.?

Actually my concern is to get feedback from Extron AVT 100N through Crestron Processor.

Re: Denon AVR4806 control via ethernet

#211089

In my experience, the older the Denon/Marantz, the flakier IP control is.? Most likely, you need to do a hard power restart of the Denon and it will start responding again for a while.? IMHO, you're much better off using RS-232 control with it - the commands are the same and if you really need to have it on the network get a Moxa nPort or equivalent.

Geoff

Show quoted text

On Sun, Feb 7, 2016 at 10:34 AM, bdige@... [Crestron] <Crestron@...> wrote:

?

Well, The Denon is acting up again. Still can ping the unit with the static ip I assigned but it I can no longer telnet or connect through toolbox with the tp/ip client.

Re: Denon AVR4806 control via ethernet

#211088

Well, The Denon is acting up again.  Still can ping the unit with the static ip I assigned but it I can no longer telnet or connect through toolbox with the tp/ip client.

Access to Labs

#211087

Hi group,

how long does it normally take to get Crestron Labs access approved?

Re: DM-MD8x8 Error message

Adonai Da Silva

#211086

There was a key digital switcher before and i replaced it with the dm-md8x8.

I have video on the displays they are all Samsung TVs but what happens is that the image flickers sometimes and sometimes it goes blank and 3 seconds after it shows up again.

I dont know if the error message is what is causing the problem or is the signal coming from the cable box. Hard to say but i really dont want to have that message displaying on the DM diplay screen.
I have already checked all the conections and everything is fine. I think that i have to authenticate it but i couldnt find it in the DM tools or any instruction on crestron true blue support page.

You said to check the DM supported display resolutions but in the config there are alot of resolutions to pick from unless i try each one of them.

Its gotta be something simple to solve the problem.

Show quoted text

On Friday, February 5, 2016, 2:56 PM, 'Michael S. Moran' msmoran@... [Crestron] wrote:

?

·??????? Is this a new Error message on a previously working DM System?
·??????? You can do a System Reboot to see if that corrects the issue...I just had an error message on one of my systems and the reboot corrected the No Picture issue.
·??????? Have you attempted to manually "Route" a proven Source to the zones issuing the error message?
·??????? Are the TV Displays On? ?They need to be.? I would normally assume that we are dealing with "known TV Displays" from mainstream suppliers as opposed to made in China by Japanese Prisoners of war.
·??????? Check your HDMI Source & DM socket connections....remove them and then re-insert...could be a simple cable connection issue.? Are the HDMI cables in good shape?
·??????? Check your DM Config as far as the supported Display resolutions for the designated zones.? They can be set individually or can also default to the lowest common display resolution.
·??????? Could be one of the Output Cards? could try swapping a known good one to see if that makes any difference ?
·??????? DM provides the ability to trace each route via the DM Tool
?
Just trying to help.
?
msm
?
?
From: Crestron@... [mailto:Crestron@...]
Sent: Friday, February 05, 2016 12:18 PM
To: Crestron@...
Subject: [Crestron] DM-MD8x8 Error message
?
?
Hi,

Can anybody help me with DM error with the following message?
HDCP ERRORS
OUTPUT 1 - DM OUTPUT UNAUTHENTICATED
OUTPUT 2 - SAME
OUTPUT 3 - HDMI OUTPUT UNAUTHENTICATED

I cant find these messages in the DM tool. Has anyone ran into this problem?
It also keeps loosing the signals on the displays when watching cable.

Thank you

Re: Denon AVR4806 control via ethernet

#211085

Thanks for the response.? No matter what I do I cannot get a web menu (Denon does not offer ffirmware for this model on their website, I fell the web browser is not capable with this model).? I was able to get the network menu to be active.? I followed Denon's instructions but it took around six tries before I was successful.

The client now shows online.

Only if there is a way to control a non jailbroken apple tv through ethernet.