开云体育

If the instructions don't explicitly say to add a carriage return and/or linefeed, then adding it isn't going to help. If a seven character command for "left" is literally "left---", ("left",

Dealing with a device that lists the following as part of their protocol. String of 8 characters, 8 bits/character; the 1st 7 characters describe the function; the last character must be the ASCII

Didn't Crestron used to have their various tradeshow programs up on the FTP servers to download? They were useful so you could pick them apart and see how they're doing things, use various graphics,

Are you running the latest CP3 firmware? Until the most recent release there were a few cresnet bugs. I had a similar issue where ML-600's would stop responding. Also you can check errlog and may

You are trying to control toolbox loads from another application, correct? I spent way more time than I should have looking at the snippet you posted and I'm not entirely clear where it actually

I'm racking my brain trying to troubleshoot an intermittent problem I am having with audio being switched through 2 BIPAD8s. It seems like the BIPAD8s aren't always responding to incoming signals. I

I was hoping you guys could help me find out what was wrong with my code.? Why isn't it working? [Non-text portions of this message have been removed]

Is it just me or do the TSW series panels have color replication problems with pngs? As well as poor resolution when compared to an Xpanel conter-parts. I haven't been impressed.

I wish I knew what to suggest. I reached a point with my original TSW file (June 2012) that it had become so unreliable that I finally threw it away and started over from scratch. I had gone through

After a couple hours of waiting, my issue has to do with sending commands to joins on another page that do not show the proper FB when you then go to that page, if that makes any sense at all.

Trying to buy the in-app upgrade in the new iPad app... It gives me the following errors when I click "Buy" confirming the $99.99 price: "Your purchase could not be completed" and "Could not

Eric, Thanks for this! Saved me some time....

It's not helpful that the error message doesn't tell you what port the error is associated with... If your IP table is complete empty and you get that message, I'm wondering if something on the

I am programming a TSW-750 and am needing to integrate an Integra 50.4 AVR. My issue is with the NetTune. The way I see it is you have to use Navigation arrows to highlight the selection and then

BTW, the issues not only with buttons but with page flips also. Not sure wht can be done. Crappy panel! I'd stay away from this one till they work out the bugs.

I have sent the command once to the panel. TB is supposed to call me back but it's been an hour without a peep. I am rebooting the panel just for the hell of it but I dont see that fixing this.

i know that Crestron recommends 6, but that is for a standard 2-series since a lot of the AES is dedicated code i would think that it is probably less than 6, but how much less? all the iPads would

"Periodicreboot on" turns on the every-day reboot cycle. It should then reboot every day at 2am. You only run the command once, on the TSW. I haven't had the feedback problems since, but there is a

On the phone now (on hold) with TB. I'm using the TSW-750 with a DMPS-300-C and having the damm button FB issue. Still trying to find out the winning combination on what is causing it or how to get it

Sweet. You are right. There I go assuming things again ;) cheers! Sent: Tuesday, June 11, 2013 8:31 AM To: Crestron@... Subject: [Crestron] Re: Media Matrix Xfram88 Tres, you're