Are you running the latest CP3 firmware? Until the most recent release there were a few cresnet bugs. I had a similar issue where ML-600's would stop responding. Also you can check errlog and may find some cryptic messages from the cresnet process. Firmware update should clear those up.
Jon
toggle quoted message
Show quoted text
--- In Crestron@..., "floyd1212" <floyd1212@...> wrote:
I'm racking my brain trying to troubleshoot an intermittent problem I am having with audio being switched through 2 BIPAD8s. It seems like the BIPAD8s aren't always responding to incoming signals. I can go into a room and turn the system on and off 50 times, and 20 out of that 50 I won't get any audio. When I check signals in Debugger, they always indicate that audio *should* be playing, but there's no way for me to be sure that the BIPADs actually received the signals.
When I do a Network Analysis on the 6 Cresnet devices in my system, I get periodic failures (see my other post about that earlier today) but I have never had one of the BIPAD8s completely fall off the network and not report back. This is all running off a CP3.
Has anyone run across this before? Is what I'm describing even possible?
