I have sent the command once to the panel. TB is supposed to call me back but it's been an hour without a peep. I am rebooting the panel just for the hell of it but I dont see that fixing this. Fingers crossed though. I was able to change some of my buttons that I only had showing text when the control system joins were high and blank or no text showing when low. By changing the join# to a visibility join and not the join press, that seemed to help make alot of the FB show on the panel better. I just can;t do that for the rest of my actual source buttons though. Panel just rebooted and guess what? The freaking FB is true now. Only thing is once you leave the page, then come back to the sources buttons, they do not have the correct FB anymore. What is joke! Wasted days for nothing. This stinks. Any other ideas would be greatly appreciated. Panel change?? I am out of ideas at this point.
Thanks,
cyberbri
toggle quoted message
Show quoted text
--- In Crestron@..., Heath Volmer <hvolmer@...> wrote:
"Periodicreboot on" turns on the every-day reboot cycle. It should then reboot every day at 2am. You only run the command once, on the TSW.
I haven't had the feedback problems since, but there is a noticeable "start up lag" and unpredictability that happens the first time someone tries to access something each day, as the various objects get going. On the panels that I have not set to reboot, I've noticed some other odd behaviors - most notably buttons going off like fireworks - so I have concluded that rebooting is the best thing to do for now.
(I'm a firm believer that this stuff is never going to work reliably like it did when a slow Cresnet thing was the go-to. We better be building this into our pricing and service plans - and our clients' expectations. I hope to heaven that I'm wrong.)
Heath Volmer
Digital Domain Systems
Littleton, CO
Sent from my iTypo 4
On Jun 11, 2013, at 12:24 PM, "cyberbri24" <cyberbri24@...> wrote:
On the phone now (on hold) with TB. I'm using the TSW-750 with a DMPS-300-C and having the damm button FB issue. Still trying to find out the winning combination on what is causing it or how to get it to stop doing this. Is this command below supposed to be only sent to the panel and at night when the user is not staring at it? My button FB is for a list of sources and it is really bubgging the hell out of me that I am wasting all day on what other people are saying is a known issue. Ugh! I can see in toolbox that my FB is high but the panel obviously is showing either wrong or no FB.
Thanks,
Cyberbri
I suspect that you'll find that they are still on line, and transmitting
presses, but have stopped responding to feedback. If not, you've got a
different problem than what many of us have been up against. I've been dealing
with this for a while and the band-aid solution for now is to use the
PERIODICREBOOT ON command to keep the things fresh every day. If someone needs
multiple reboots per day, you may need to devise logic to console and issue
reboot commands multiple times.
We've been through the "channels", all the way. No more channels to go through.
They know that something is wrong. I had almost lost faith in my own ability to
finish ;-).
Heath
[Non-text portions of this message have been removed]
