开云体育

Not to hijack the thread, but is anyone using AirPlay extensively? I have a few customers who use it via AppleTV, and chose to forego dedicated docks, but sometimes AirPlay devices don't show up as

Forget about wall dock and adapter. The iThingy won't fit Saludos, Regards, Mit freundlichen Gr眉脽en, Bart J. Podkowka CISoftware Mallorca Tel. +34 616273563

Try coolcontrol unit. It works better than direct comms. Saludos, Regards, Mit freundlichen Gr�遝n, Bart J. Podkowka CISoftware Mallorca Tel. +34 616273563 www.cisoftware.eu<http://www.cisoftware.eu>

It's been several months since the lightning iThingies have come out. I know there are various adapters available. Does anyone have any good/bad experience to share regarding IDOCs (wall mount) and

I thought you used to be able to just send serial text to that attribute and have it logged correctly, but apparently not. Digging around the RoomView demo program (available from the RVSE page, not

Not to hijack your thread, Heather, but if anyone knows the same thing for the MLX-2, it would be appreciated. I've got one that requires a hard button press to wake and another that issues the

Nevermind.... Ctrl+P in VTPRO

I had set my MLX-3s to require a hard button press to wake first, then press again to send a command. One of my clients is asking me to disable this, but I can't figure out where I set this. Anyone

Turns out it was a module not compiling correctly. Alt-F12/"Compile All" did the trick. Thanks again Lincoln.

If you downloaded the UN55ES8000 module from the website. It's a straight through cable. Did you load BOTH the Hardware & Logic modules into your program? Did you make your own cable, or use a Samsung

Pretty easy, either straight 232, ip or a 232 to vantage keypad interface.

Loaded the latest yesterday, had a hiccup but it reported OK afterwards. I will try again and then call TB. Thanks Lincoln.

Very sturdy. I have a system with about 7 years or so. The only problem I had was that the Vantage module (D-Box) lost some IDs but we get into it and set the missing IDs. and it was all working. --

I told them that. Not sure why they don't From: Geoffrey Reynolds <greynlds@...<mailto:greynlds@...>> Reply-To: "Crestron@...<mailto:Crestron@...>"

Maybe Control4 sent them a box of golf balls in exchange for the API documentation and Crestron was unwilling to do the same... I just don't get companies that play these stupid games - making the

Thank you Steve. That certainly changed the way i was trying to accomplish it and make it real simple as well. I was originally try to create a function which has wait statement and return the value

I notice they reference 115,200 baud rate? Have you tried that? _____ From: Crestron@... [mailto:Crestron@...] On Behalf Of grumpy_cake Sent: Wednesday, May 01, 2013 3:24 AM

Has anyone had experience with Vantage? If so how was the integration side with Crestron? Certain modules etc you should and should not use?

Make sure you're running the latest firmware... the original firmware had a number of nasty quirks including the program not starting automatically and also stopping (but not restarting) the program

Their also several things the Daikin programmer must do, to make sure the Daikin will talk TCP/IP. A key needs to be entered in the the Daikin unit. From: jugglinjim