Loaded the latest yesterday, had a hiccup but it reported OK afterwards. I will try again and then call TB. Thanks Lincoln.
toggle quoted message
Show quoted text
--- In Crestron@..., Lincoln King-Cliby <lincoln@...> wrote:
Make sure you're running the latest firmware... the original firmware had a number of nasty quirks including the program not starting automatically and also stopping (but not restarting) the program when you entered setup... It sounds like these may be (part of) your problem.
Lincoln
--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
Crestron Services Provider
-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of kevinzolitor
Sent: Wednesday, May 01, 2013 2:28 AM
To: Crestron@...
Subject: [Crestron] TPCS-4SM won't take program?
Hi there everybody.
My first TPCS-4SM. Loaded the SIMPL program, appeared to go fine, but Toolbox info reports no program. Cannot debug. Program does not appear to be running. Tried restarting the panel and my PC. Running latest firmware. Panel connected directly to my laptop. Cresnet devices in the program, but not connected.
At the DEV console, "DIR" returns what appears to be the correct file list.
I had an MC3 that seemed to have a similar issue. Only fix was a firmware downgrade.
VTPro project seems to run fine.
Anyone run into something similar?
TIA
Kevin Zolitor
Denver, CO
------------------------------------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links
