开云体育

Hi Lincoln Yeah I reckon ours are about 1 in 5 too, and definitely the transmitters, receivers are generally OK. I've also wondered about the life exepectancy of the 2G's in wall mounted type...

Well, first update and fail. Need to have a accound name with less than 21 characters. Sucks for this client since his is using a Pandora One account with multiple devices streaming. He doesn't want

Hi to all!! I am new to this group I am a novoice to Crestron programing ...Here's my problem I set up all pages and feedbacks and joins I am using SystemBuilder 3.3.15 and also the SystemBuilder

Anyone have a module for the SX20 or know of one? I trued to speak with Cisco about it, but I should have just spent that time talking to the wall...results would have been the same

DM Transmitters seem to have a much higher failure rate than other devices -- I suspect it might have something to do with how bloody hot they run [I nearly burnt my hand picking up a DM-TX-201-C-2G a

Hi All We seem to be having quite a few of these failing lately under warranty, Disproportionate to what we would normally expect. Anybody else getting the same? Maybe a bad batch? Or are we just

Hello, I am trying to communicate with this receiver via IP. I've set up the port number and IP address on the receiver and placed a TCP client in my program. I am using the IP module for the Yamaha

Don't think this is correct. EISC definitely uses UDP. We are using Wireshark and CISCO Capture to debug some performance issues and all EISC communications we have seen is using UDP packets. All

Oh I have.. but only like twice. Didn't pick up on the 6-handed quote. Please don't tell my wife!

Yes, the subscription-less Pandora accounts get paused after some period of time w/out activity. You'll need to do some kind of interaction with the stream at least every hour or so, or upgrade to P1.

No Ethernet on those projectors? - Chip

The other option being an input card and TX w/USB on it... We have a job where a DVI input card (taking video from a source that didn't require the USB) was supposed to accept a keyboard/mouse combo

The data sheet implies it is: "Basic API available over IP (Telnet or Secure Shell Protocol [SSH]) " [Non-text portions of this message have been removed]

I know this is late but...I just ran into this same issue today and changed the button style from 3D to 2D and everything ran smoothly after that.

Any suggestions on a new install the friendliest automation-ready garage door opener? Looking for the kind that operates on simple contact closure switch. Separate magnetic sensors will be used for

Dumb Question, but does nayone know if the Cisco Tandberg SX20 is controllable with the Crestrons?

I just received my first ATC-AUDIONET card and immediately upgraded to support the new Pandora features. I've left it playing in the office almost all day, and I have noticed that it just stops

Sharp used to be pretty good, but I ran into a unit the other day that I could not find discrete for either. It was the LC-32SV29U. On most standard sharp codes I found, input 2 would send a freeze

If you are using crosspoints to connect a panel to a zone you must be initializing an analog value for the zone you want the panel to connect to when you press that "Kitchen" button. Look at using the

Hi, I am looking for discrete ir (crestron-codes) for Sharp. ? ? Shan