开云体育

Hi Brian, Your BTINTERVAL or IDINTERVAL? may not be set in the config file. I recommend you set your Beacons up in Web Node under Ports. That way you can change them on the fly without rebooting BPQ.

Hello, I am having an issue where my beacon only transmits on AXIP. Is there script in the cfg file I need to massage to make it work on my HF port (port 1) . Thanks, Brian WD9HXC

Thank you, John. That's it. PS: Shame on me, if I have looked into bpq,cfg more thoroughly, I would have found resolutions for both things explained there. Misko YT7MPB

It used to be a problem with some browsers, but I thought I'd fixed it - it seems ok with the ones I use here. Which browser are you using? The Terminal in the Web interface isn't really intended for

I have used the terminal in linbpq.? However it exhibits some strange behavior. Every time I enter something in the command line at the bottom of the terminal or the terminal receives some data the

Ok, I'll remember that. It appears I have linbpq running on the Pi.? Several other area hams have connected to my BBS.? Even though I still don't understand much of this this is progress. Thanks for

John, I upgraded to the latest beta and all now works as expected. 73 Jim KY2D Sent: Thursday, February 18, 2021 08:25 To: [email protected] Subject: Re: [bpq32] Disconnect not recognized Could you send

Thanks John, We are back in bussiness. 73, Jim

The 15th Feb beta version is the latest. The version in the Downloads directory is a rebuild of the latest release 6.0.21.1 that I had accidentally deleted. But I built it from the published source

Did an auto-update and mine failed as well. Is there another location to download from? Thanks, Jeff N9JXN

Hi John, After downloading pilinbpq, dated 02-18-2021, it says it is looking for libconfig.so.9 and fails to start. The beta version dated the 15th of Feb is working fine. Just wondering if I

Set QUALITY=0 on the APRS port. You can't selectively disable ID frames, you can only turn off for the whole system (by setting IDINTERVAL=0). 73, John

Hello, I want to 'advertise' a local VHF packet node & BBS (running on 144.875 MHz) by adding another VHF port on 144.800 MHz (APRS-only) where I just want it to send APRS beacons (GPS position) once

Hi All Got myself very confused there (not hard) got my 2 configuration swapped over trying different port description. Amazing how you can miss little thing looking at problems, typo on my behalf

That is a bit weird. Assuming you want to use the USB serial port it should be COMPORT=/dev/ttyUSB0, but if it says it is trying to open ttyAMA0 then maybe you are looking at the wrong bpq32.cfg. 73,

Hi Keith, Try this? COMPORT=/dev/ttyUSB0 Ken, W9GM

Hi All Can anyone see my mistake,???dmesg | grep tty produces :-[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1

Could you send me the BBS log showing the failed connect attempt? Also it might be worth trying the latest Beta version of BPQMail.exe. Thanks, John

Ahh the eternal battle of what exactly is the End Of Line. With windows putty make sure he applied the setting to the current session or save it to the session and disconnect / reconnect. If all else

Ctrl/C closes linbpq. Closing the window doesn't. 73, John