开云体育

It seems ok here. Are you sure you haven't accidentally removed RELAYHOST or FALLBACKTORELAY? 73, John

Howdy. . . . . This may not be a memorable moment for the subject but it IS for me. Without going into a lot of detail about Windows issues on a computer, I was placed in a position of finally facing

That fixed it, and my store and forward seems to work. I did not try the three times in a roll as reported.

You have connected to the Chat Server, not the BBS. Check that the Application Number setting in the BBS and Chat Server config screens match the definitions in the APPLICATION lines. 73 John

So I have been following along as I am also new and trying to get my PiGate up on e tower. After making the changes as shown below, I get a different error. Error: 2021/02/25 15:31:49 Connecting to

Hi Andre, Your life will be made much easier with a few scrips as seen here - and also, there are examples of a running LinBPQ in this video: https://www.youtube.com/watch?v=R34pMPZbfeU Steve K6ETA

John, When I remove the ethernet cable from my Raspberry pi I got this messages from the first and all following login attempt. I also wait 20 minutes and got the same messages Version 6.0.21.19 ***

The Node Map uses UDP port 81 and the Chat Map UDP 10090 73, John

There are two timeout, the Node IDLETIME (normally 15 minutes) and the Chat Idle Timeout (2 Hours without user input). Chat has an option (/keepalive) that will make it send a message to the user if

So I have searched the groupsio to find examples or to help my learning to put it all together with examples of the following ; LINBPQ is a Linux version of the BPQ32 Node,? BBS and Chat Server

whoops. an error on my part. we’re using port 8010 for the telnet. Anybody have an idea about the timeout? Thanks. Tadd

Yes John I have to say outstanding notes and directions.? thanks for sending what you did. Over the last 24 hours of working on this ... I have got - *BPQ32 Node* and *PAL* installed. This is the

For starting linbpq see the "Running LinBPQ automatically" section of http://www.cantab.net/users/john.wiseman/Documents/InstallingLINBPQ.html 73, John

Sorry to everyone,? I am extremely new to all this. It seem my issue was that after a reboot or a restart I have to start the service again. *1.)?? BPQ32 Node* *(start the service running)* Web

update ::?? success accessing the client confirmed I have the client working using a unique port just an example???? -? http://192.168.1.999:99992/ui# is the following the main used access

Hello group, Yes so I have to say I days old to all of this, I am interested in a service called "winlink",? I would like to setup it all (server/client) up,?? I would like to setup the "server"?

It appears that the msgtypes does not work when using VARA for HF, unless I have it in the script wrong ? This script connects just fine , but does not limit the size of bulletins sent. IDLETIME 60

One of my locals (kn4orb) is writing a Raspberry PI Python program which interfaces with CHAT. He's telnetting from a Python app on the Raspberry PI to pilinbpq on the same PI to address 127.0.1.1 and

Thanks for information Ray, with "attach command" it is working fine. Regards, Robert, VE2HAR

Maybe you have to use the attach command Att 3 C hb9zf-10 Ray N3HYM