开云体育

John: That looks better! *Indeed, and I can get to it from the Pi or one of my other computers. However another error has turned up:* G8BPQ AX25 Packet Switch System Version 6.0.21.24 February 2021

It's Pactor on HF using an SCS PTC-IIusb. The connect script has ATT 4, RADIO to set freq and mode, the C to call, then ELSE, PAUSE 5, and another attach, radio, and call command set. Poor propagation

What type of port is this? 73, John

I recently upgraded to Windows BPQ 6.0.21.1 and find frequently that after a connect attempt fails or a connection is dropped, BPQ thinks the connection is still active. When attempting to manually

John, Good morning, this is fantastic. Just tested it briefly. Everything looks good so far. My TCPKISS Port is being hidden. Great! Thanks Frank KO4FQW

The latest Beta includes the option to hide a port from the PORTS display and the Port List in the AGW Emulator. The port is still visible via the management interface. Add HIDE=1 to the main section

Brian,?I can set you up as a forwarding partner if you like.?Ken W9GM?Sent from my Galaxy

OK thanks for info! Sent from Mail for Windows 10 Sent: Wednesday, February 17, 2021 7:42 AM To: [email protected] Subject: Re: [bpq32] Setting up AXIP #bpq32 To use an AXIP link to need to find a

To use an AXIP link to need to find a station to link to and exchange IP address / Host Name information. Once the link is configured you can test by trying to connect to your partner's call. 73, John

HI, Is there a way to test the AXIP ports to know they are working ok? I am just setting this all up using a signalink clone not a external TNC. It seems the program is working ok and sending and

That looks better! You may be able to find what Direwolf is complaining about by turning on KISS Network debugging by adding -d n to the direwolf command line. 73, John

After making a connection out on the scs tracker , it will not resume scan mode between hf packet and robust packet. Ray N3HYM

*Progress!* *I made the above change and when I started linbpq I get this:* BPQ AX25 Packet Switch System Version 6.0.21.24 February 2021 Copyright ? 2001-2021 John Wiseman G8BPQ Current Directory

John: *I followed these instructions explicitly.? All seemed to work as expected except as noted.* now open your file system, open linbpq, right-click on the HTMLPages.zip and select Extract Here.

Thanks John... That is a combination of commands that I had tried previously, but not using the FBB port for the remote station. Lo and behold, using your example, a successful connection followed! A

It also looks like you might want to start from scratch, because your current version doesn't seem to initialize any of the ports for some reason. If you already changed the name of your BPQ directory

You only need -p with direwolf if you need to create a kissattach to an axport to use a terminal with direwolf. Not needed for bpq, as it has it's own ax stack and is just using direwolf as a TCP TNC.

Ok, There is something wrong with bpq startup. When I run your config I get G8BPQ AX25 Packet Switch System Version 6.0.21.23 February 2021 Copyright ? 2001-2021 John Wiseman G8BPQ Current Directory

John: Is that the whole of the startup message? You should have lines starting "Initialising Port". *Yes.* This is probably a stupid question, but does linbpq keep running? Ie does it exit? *I believe

Mike, The user, password and application should all be given on the connect line: ATTACH p C Hostname TCPport [NEEDLF][TELNET} User Password [Command] So I used: att 2 BPQ:G8BPQ-2} Ok c 192.168.1.44