Set QUALITY=0 on the APRS port.
You can't selectively disable ID frames, you can only turn off for the whole system (by setting IDINTERVAL=0).
73,
John
toggle quoted message
Show quoted text
On 19/02/2021 11:52, Misko YT7MPB wrote:
Hello,
I want to 'advertise' a local VHF packet node & BBS (running on 144.875 MHz) by adding another VHF port on 144.800 MHz (APRS-only) where I just want it to send APRS beacons (GPS position) once per hour, as well as to receive local APRS traffic and plot it on the map.
What I do not want is that new port sends nodes broadcast and node IDs, as those two add unnecessary traffic on the APRS channel. So how to stop the new port to behave as 'regular' node/bbs port? (I added to my config the port params from the APRS sample, and it does send GPS location to the map. But as I said, nodes broadcast and station ID are not wanted.
Misko YT7MPB
