开云体育

Maybe you need metric. Here are some set choices available from Harbor Freight. Other merchants offer similar ones. Charles

What is the proper allen key to use with the Craftsman 101 6" lathe chuck? I have used a 7/32" key but, it seems loose. 1/4" is too big. The original owner verified that I should use a hex key but,

hi bill i tried to respond to your email address and it gets rejected fred ________________________________ Sent: Saturday, July 29, 2023 2:55 AM To: [email protected]

An Oreck XL010-0604 seems to work just fine. That's what was on it when I got it. Walmart has them for under $6 each.? They probably won't last forever, but I can worry about that later. ;)? Figured

Bill in OKC, try https://westcoastbelts.com/contact-us/ I have had good dealings with them, found a belt for an old 8 track player there. They also do custom belts, I'd call them to locate the belt

Yes, the switch is on the cord, a couple of feet from the TPG. Cord looks to be 15 or 20 feet long. May try to get that squared away today, if I can. Wife has been particularly sick the past couple of

Thanks Robert . animal

The line switch on my factory TPG is in the line cord.? The unit was bought the summer of 1980, about a year before the last 3996 rolled off the assembly line so it's a safe assumption that all of

I don't know if yer pic's showed the switch , is it on motor . My Atlas TPG has the switch on the cord .My grandma would have liked that . She had so many things plugged into those old extension cords

Forgot to mention that it's a 1/3hp 115VAC/DC universal motor, so it should be speed controllable, too. Supposed to have a 3-wire grounded plug, but not anymore. Will have to fix that. Looks like

Got it a bit ago, did some measurements with my HF 12" digital caliper, numbers aren't exactly right, but based on sizes and fairly close dimensions, it's a J-3, spindle says 35000rpm, designed for

I found their website Sunday, and downloaded a number of their parts lists with diagrams. Is where I found out the sizes of the spindle nuts. Also one that shows the dimensions of the various

Themac LLC 117 Patterson St Hillsdale, NJ 07642 (201) 438-2313 info@... Parts are still available. I have a J45.

I don't know what version it is now, but I'm hoping, based on apparent sizes of the spindle nuts and such that it's one of their smaller, J-2 or J-3 machines. Those are sized for 9-12" lathes. It

Just watched both videos Dennis; spot on thanks. wrote:

On 7/23/23 15:13, Bill in OKC too via groups.io wrote: I got a TheMac J4 tool post grinder many years ago.? I put it on a 12" Craftsman, and it was really a bit too large for that lathe.? Now, I

See Mr Pete222 you tube channel. I believe that that is his favorite style of knurling tool Dennis via Moto Z3 716-720-0940

What I get is in the first two photos I posted. I will be needing all but 2 pullieys,? belt guards, and internal grinding adapters, plus some grinding wheels. Some put a 6" grinding wheel on it, and

Steven: thanks for the information and especially the suggestions. I'm very new to this so the specific ideas to make it work are very helpful. Bryan

hi bill i have a lot of spare parts for the themac grinders let me know what you need off hand you need a few different pullies to adjust the speed for different size wheels also you need the mount to