ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
esc to dismiss
Re: Setup of Compact Bender
Hi Will,
My experience with benders is that you occasionally “always" need more room. ?So unless you have lots of space, my suggestion is to either build a stand that’s heavy but movable, or to mount it on a piece of wood/metal that you can clamp to a bench or something else when the need arises.
toggle quoted message
Show quoted text
On Jan 9, 2025, at 9:16?AM, Will via groups.io <the_william@...> wrote:
Hello,
This might be a little off topic for a machining group but I have a metal-working-related question that someone here might be able to provide some good information about. ?I recently came across an unused Compact Bender (floor model) at a price point that was way too good to pass on. ?I am looking to attach it to the floor of my garage using caulk-in anchors so I can set it up and take it down as needed. I have not used one of these benders before but I've watched quite a few videos. My question is about critical space around it. ?How close to the nearest wall would you get (figuring farther away is better but space is limited). In other words, what is the minimum amount of space you would recommend from any wall. And, which side do you feel can work with the least amount of space? I've got some thoughts on these things but wanted to see if anyone here has experience with one of these benders and has some thoughts about the initial setup.
Will
|
Hello,
This might be a little off topic for a machining group but I have a metal-working-related question that someone here might be able to provide some good information about. ?I recently came across an unused Compact Bender (floor model) at a price point that was way too good to pass on. ?I am looking to attach it to the floor of my garage using caulk-in anchors so I can set it up and take it down as needed. I have not used one of these benders before but I've watched quite a few videos. My question is about critical space around it. ?How close to the nearest wall would you get (figuring farther away is better but space is limited). In other words, what is the minimum amount of space you would recommend from any wall. And, which side do you feel can work with the least amount of space? I've got some thoughts on these things but wanted to see if anyone here has experience with one of these benders and has some thoughts about the initial setup.
Will
|
So many awesome options!?This is great.?
The one I liked best was that simple piece of plate bent at one end and held in the bench vise. Simple and cheap, and does not take much space in the shop.?
My shop is in the basement utility room and if i gain any weight, i won't fit in there, so space is at a premium.?
toggle quoted message
Show quoted text
Love my Swag band saw table with slots for Incra v27 ?miter gauge .Love that both made in USA ,not Asia links below .
Kind regards ,
Ron retired Defense high density metals?
Indiana? ?
Research how Blondie Hacks modified her saw with a table? ?
Dennis
via Moto Z3
716-720-0940
|
Love my Swag band saw table with slots for Incra v27 ?miter gauge .Love that both made in USA ,not Asia links below .
Kind regards ,
Ron retired Defense high density metals?
Indiana? ?
toggle quoted message
Show quoted text
Research how Blondie Hacks modified her saw with a table? ?
Dennis
via Moto Z3
716-720-0940
|
Try Swag Off Road They make a nice series of stands that fit on a workbench. I have one for my corded Milwaukee saw and would recommend it.
On Tuesday, January 7, 2025, 11:59 PM, mike allen <animal@...> wrote: Hey folks , I have this old Milwaukee porta band that has ben hanging
out since i retired . It's a lot heavier that I remember them being .
Have any of you come up with a bench or even a free standing setup that
will let ya use a porta band like a cut off saw . I'm looking for ideas,
pics , things that didn't work .
thanks
animal
|
Research how Blondie Hacks modified her saw with a table? ?
Dennis
via Moto Z3
716-720-0940
|
|
|
Here’s a commercial version.?
Charles
toggle quoted message
Show quoted text
On Jan 7, 2025, at 10:59?PM, mike allen <animal@...> wrote:
?Hey folks , I have this old Milwaukee porta band that has ben hanging
out since i retired . It's a lot heavier that I remember them being .
Have any of you come up with a bench or even a free standing setup that
will let ya use a porta band like a cut off saw . I'm looking for ideas,
pics , things that didn't work .
thanks
animal
Hey folks , I have this old Milwaukee porta band that has ben hanging
out since i retired . It's a lot heavier that I remember them being .
Have any of you come up with a bench or even a free standing setup that
will let ya use a porta band like a cut off saw . I'm looking for ideas,
pics , things that didn't work .
thanks
animal
|
Originally, yes, but corrected to the clamp plate later.
Bill in OKC?
William R. Meyers, MSgt, USAF(Ret.)
Aphorisms to live by: Good judgement comes from experience. Experience comes from bad judgement.? SEMPER GUMBY!
Expect in one hand, expectorate in the other. See which one gets full first.
On Tuesday, January 7, 2025 at 06:40:57 AM CST, Brian Roberts via groups.io <bri7rob@...> wrote:
Drawing for the tailstock base....which IS what the OP asked for....unless I am mistaken?
?
http://vintagemachinery.org/pubs/51/29796.pdf
|
The clamp is what I needed, thank you!
Of course I'm already 3/4 of the way of building a replacement based on my own (crude) measurements. LOL
Allen Underdown
allen@...
Sent from my mobile device.
Jan 7, 2025 6:41:52 AM Brian Roberts via groups.io <bri7rob@...>:
toggle quoted message
Show quoted text
[Edited Message Follows]
This is the drawing for the clamp...which is what the OP wants?
?
http://vintagemachinery.org/pubs/51/29798.pdf
|
Drawing for the tailstock base....which IS what the OP asked for....unless I am mistaken?
?
( yes I know the M6-7 is the part number for the clamp.....but more info in our posts is always better!)
?
http://vintagemachinery.org/pubs/51/29796.pdf
|
This is the drawing for the clamp...which is what the OP wants?
?
http://vintagemachinery.org/pubs/51/29798.pdf
|
Hello Bill:
In his initial post on this topic Allen Underdown specifically asked for the tailstock base (bottom tailstock):
?
"Anybody know where I can find a bottom tailstock M6-7 replacement for a 618?"
?
The part number he noted does not match his description so I offered a link to the part that matched his description.
?- Raymond
?
|
That's a tailstock base, not the clamping plate.
Bill in OKC?
William R. Meyers, MSgt, USAF(Ret.)
Aphorisms to live by: Good judgement comes from experience. Experience comes from bad judgement.? SEMPER GUMBY!
Expect in one hand, expectorate in the other. See which one gets full first.
On Sunday, January 5, 2025 at 05:34:46 AM CST, mondosmetals via groups.io <jwrey@...> wrote:
|
|
|
All there is for what? If you have the tools, you can build better and more complex tools. If you have the skills. The guys who started all this had files and hammers and chisels and saws. Now there are machines that can machine an entire engine block... and before that people learned to do quite a bit on their own.?
And there are books, magazines, and videos. That has not always been so. I've 3D printed gears that fit my Atlas lathe. I've made backplates, collet holders, way bars, milling tables, and parts for industrial machines to keep them running. Melted and cast parts in metal, and machined, forged, ground and filed bits and pieces to make and repair stuff. Worked as a mechanic, assembler, or technician on high performance fighter jets, racing go-karts, micro and main computers (missed the mini-computers), AV & photographic equipment, satellite and radio communications systems, home & industrial appliances and other machinery, and automobiles, boats, and bikes,? both pedal & motorized.?
Ebay is far from the only source, though it can be a good one.?
Bill in OKC?
William R. Meyers, MSgt, USAF(Ret.)
Aphorisms to live by: Good judgement comes from experience. Experience comes from bad judgement.? SEMPER GUMBY!
Expect in one hand, expectorate in the other. See which one gets full first.
On Saturday, January 4, 2025 at 05:13:30 PM CST, Joel Rogers via groups.io <rogersjoel830@...> wrote:
On Sat, Jan 4, 2025, 2:59 PM Bill in OKC too via <wmrmeyers= [email protected]> wrote: For future reference you can build an "oven" from firebrick to concentrate the heat from multiple torches. It's not impossible to find propane or acetylene torches that are airbreathers, like the Prestolyte and TurboTorches. Oxy-fuel torches for both gases are available, too. Initial cost can be high if you buy new, but you'd be surprised at all the things you can do and fix once you've bitten that bullet.?
I'm not a professional welder. More a "farm" welder, but I was taught by a very accomplished all-purpose welder. Just need more workspace, practice, and materials...
Hi! My name is Bill, and I'm a toolahaulic!?
Bill in OKC?
William R. Meyers, MSgt, USAF(Ret.)
Aphorisms to live by: Good judgement comes from experience. Experience comes from bad judgement.? SEMPER GUMBY!
Expect in one hand, expectorate in the other. See which one gets full first.
On Saturday, January 4, 2025 at 12:21:55 PM CST, Allen Underdown via <allen= [email protected]> wrote:
Youngest is a professional welder - he said it would be a PITA as small as it is.
I also don't have anything that generates enough heat to braze.
I figured if I couldn't find one I'd call Clausing.
Luckily, I went down to Shapiro's the other day and found some nice scrap 1x2 either hot rolled or forged bar stock. It's heavy as heck. ;)
Milling one from ruler measurements wouldn't be difficult. That way I can get it back to a point that allows me to use the tailstock.
Allen Underdown
allen@...
Sent from my mobile device.
|
toggle quoted message
Show quoted text
On Sat, Jan 4, 2025, 2:59 PM Bill in OKC too via <wmrmeyers= [email protected]> wrote: For future reference you can build an "oven" from firebrick to concentrate the heat from multiple torches. It's not impossible to find propane or acetylene torches that are airbreathers, like the Prestolyte and TurboTorches. Oxy-fuel torches for both gases are available, too. Initial cost can be high if you buy new, but you'd be surprised at all the things you can do and fix once you've bitten that bullet.?
I'm not a professional welder. More a "farm" welder, but I was taught by a very accomplished all-purpose welder. Just need more workspace, practice, and materials...
Hi! My name is Bill, and I'm a toolahaulic!?
Bill in OKC?
William R. Meyers, MSgt, USAF(Ret.)
Aphorisms to live by: Good judgement comes from experience. Experience comes from bad judgement.? SEMPER GUMBY!
Expect in one hand, expectorate in the other. See which one gets full first.
On Saturday, January 4, 2025 at 12:21:55 PM CST, Allen Underdown via <allen= [email protected]> wrote:
Youngest is a professional welder - he said it would be a PITA as small as it is.
I also don't have anything that generates enough heat to braze.
I figured if I couldn't find one I'd call Clausing.
Luckily, I went down to Shapiro's the other day and found some nice scrap 1x2 either hot rolled or forged bar stock. It's heavy as heck. ;)
Milling one from ruler measurements wouldn't be difficult. That way I can get it back to a point that allows me to use the tailstock.
Allen Underdown
allen@...
Sent from my mobile device.
|
For future reference you can build an "oven" from firebrick to concentrate the heat from multiple torches. It's not impossible to find propane or acetylene torches that are airbreathers, like the Prestolyte and TurboTorches. Oxy-fuel torches for both gases are available, too. Initial cost can be high if you buy new, but you'd be surprised at all the things you can do and fix once you've bitten that bullet.?
I'm not a professional welder. More a "farm" welder, but I was taught by a very accomplished all-purpose welder. Just need more workspace, practice, and materials...
Hi! My name is Bill, and I'm a toolahaulic!?
Bill in OKC?
William R. Meyers, MSgt, USAF(Ret.)
Aphorisms to live by: Good judgement comes from experience. Experience comes from bad judgement.? SEMPER GUMBY!
Expect in one hand, expectorate in the other. See which one gets full first.
On Saturday, January 4, 2025 at 12:21:55 PM CST, Allen Underdown via groups.io <allen@...> wrote:
Youngest is a professional welder - he said it would be a PITA as small as it is.
I also don't have anything that generates enough heat to braze.
I figured if I couldn't find one I'd call Clausing.
Luckily, I went down to Shapiro's the other day https://www.shapirosupply.com/ and found some nice scrap 1x2 either hot rolled or forged bar stock. It's heavy as heck. ;)
Milling one from ruler measurements wouldn't be difficult. That way I can get it back to a point that allows me to use the tailstock.
Allen Underdown
allen@...
Sent from my mobile device.
|
I forgot about these guyz , thay may have one?
animal
|
Youngest is a professional welder - he said it would be a PITA as small as it is.
I also don't have anything that generates enough heat to braze.
I figured if I couldn't find one I'd call Clausing.
Luckily, I went down to Shapiro's the other day https://www.shapirosupply.com/ and found some nice scrap 1x2 either hot rolled or forged bar stock. It's heavy as heck. ;)
Milling one from ruler measurements wouldn't be difficult. That way I can get it back to a point that allows me to use the tailstock.
Allen Underdown
allen@...
Sent from my mobile device.
|
Bill in OKC too