开云体育

As others have said, eBay and McMaster-Carr.? The material cost is small considering the many hours of machining that goes into a project. And I can usually find exactly what I want with little

I assume that it is 1 1/2" x 8 thread, suitable for mounting on an Atlas 10" lathe, and that the key is with it. Please? advise the cost of shipping to Manchester, Maine via U.S. Post or FedX (my

Capacaty of chuck is 6 inches. Sent from Mail for Windows Sent: Tuesday, April 2, 2024 6:37 AM To: [email protected] Subject: Re: [atlas-craftsman IO] Atlas Lathe Parts For Sale. 4 Jaw

Hi Robert, Wondering if this a lever-operated collet closer or the more common handwheel style? I'm trying to find a lever type for one of my Atlas 10's. A couple of photos would be great. Thanks!

Any chance you could post a picture of this chuck?

fits most 10 and 12 inch atlas/sears lathes ________________________________ Sent: Sunday, March 24, 2024 5:42 PM To: [email protected] <[email protected]> Subject: Atlas Lathe Parts

chuck is 6 inch in dia. ________________________________ Sent: Monday, March 25, 2024 12:38 PM To: [email protected] <[email protected]> Subject: Re: [atlas-craftsman IO] Atlas Lathe

On Sun, Mar 31, 2024 at 07:57 PM, mike allen wrote: > > > > SO looks/sounds? like yer missing the banjo ? I see some @ 25 & up on ebay > , there may even bee a print for one in the files section

SO looks/sounds? like yer missing the banjo ? I see some @ 25 & up on ebay , there may even bee a print for one in the files section . Is this lathe a 618 lathe ? animal

Hi everyone, I have replied to others posts but never(?) posted a project of my own. I accumulated a Craftsman 6" a few years ago. Not running, and missing some parts. I disassembled much of it, but

Facebook marketplace offers, no connection to me https://www.facebook.com/marketplace/item/1475945832959038/ https://www.facebook.com/marketplace/item/7337904256317216/

Steve, I had a look at your webpage and instagram. Beautiful work. I especially like those gates shown on your page, and the prize winning scale on insta. Bravo, Bryan

Hey Mike Didn't even cross my mind that a work around could be single pulleys of the required sizes just screwed together. I'll take a look at the YT link as well. Genius, thank you! Steve

Mike, I will send you some information about your lathe along with parts list. I also have lubrication info. Glad to help you out. Jim

Pulleys are a real good first project . Ya can make then one at a time & just hold them next to each other with the set screws on the shaft

There are VFDs available for single > three phase use.

Thanks for having a search, Bill. Shipping from the US to UK can be, interesting. Might be cheaper to find someone who could produce the pulley for me. Definitely out of my skill range at this point

Hey Brian That's what I thought as well. The pulley does move but the belt is far too tight and won't lock if it is at any other position apart from the one shown in the picture. A 3 or 4 step would

Hi Mike It's a single phase AC 550w motor RPM 1425 My workshop is only single phase, and I've never had the pleasure of having a motor with a VFD to understand how those things work. Thanks Steve

Hi Jim I will see what I can source from ebay, now that I know what I am looking for. I got a few bits of tooling but no literature about the lathe from the previous owner. Thanks for the reply!