开云体育

Facebook marketplace offers, no connection to me https://www.facebook.com/marketplace/item/1475945832959038/ https://www.facebook.com/marketplace/item/7337904256317216/

Steve, I had a look at your webpage and instagram. Beautiful work. I especially like those gates shown on your page, and the prize winning scale on insta. Bravo, Bryan

Hey Mike Didn't even cross my mind that a work around could be single pulleys of the required sizes just screwed together. I'll take a look at the YT link as well. Genius, thank you! Steve

Mike, I will send you some information about your lathe along with parts list. I also have lubrication info. Glad to help you out. Jim

Pulleys are a real good first project . Ya can make then one at a time & just hold them next to each other with the set screws on the shaft

There are VFDs available for single > three phase use.

Thanks for having a search, Bill. Shipping from the US to UK can be, interesting. Might be cheaper to find someone who could produce the pulley for me. Definitely out of my skill range at this point

Hey Brian That's what I thought as well. The pulley does move but the belt is far too tight and won't lock if it is at any other position apart from the one shown in the picture. A 3 or 4 step would

Hi Mike It's a single phase AC 550w motor RPM 1425 My workshop is only single phase, and I've never had the pleasure of having a motor with a VFD to understand how those things work. Thanks Steve

Hi Jim I will see what I can source from ebay, now that I know what I am looking for. I got a few bits of tooling but no literature about the lathe from the previous owner. Thanks for the reply!

IIRC, the Acorn is a copy of the Atlas lathes. You might be able to get the correct pulley, which as another poster has said, is a 10-80. I didn't find any on ebay.co.uk, but there are a couple in the

You need the Atlas 10-80 countershaft pulley. This is used on all 10” and 12” lathes from Atlas or Craftsman.

I will look in my lathe file and see if I have the 10F parts catalog, then I can send you the part number you need. Do you have any literature for your new toy?

Are you 3 phase ? What is the motor voltage ? If it's a 3 phase motor I'd look into putting a VFD on it , that gives ya variable speed at the twist of a knob . There's also the tread mill motor rout &

Yes, unless there is enough adjustment in the countershaft to allow sliding the drive pulley to the next pulley size then maybe there should be a 3 size pulley on the countershaft, no?

You can search for 10F parts as they are the same as your lathe. The V stands for vertical location of the motor shaft. Search EBay is the best option.

Good evening folks. I acquired this Atlas 10 TV36 lathe last year. Not had much time to put it to use but I bought it because it was in good condition and within my area (it is hard to have equipment

What is the capacity of the chuck? God bless you all and best regards Roger Francis KarlManchester, Maine . On Monday, March 25, 2024 at 10:28:52 AM EDT, Robert Eggleston

Glad to know it was more than user error causing my poor results. It is a little discouraging when the dross outweighs the product. Between the aluminum can fiasco and starting a magnesium fire, I