开云体育

I don't have a lot to say about the machine right now.? Need some time to get it set up and running and I'll take a closer look at it and share my comments later.

> > One man's junk is another's treasure ??

I must say from the pictures that machine looks to be in great shape not the usual abused , neglected and seriously rusted we have come to expect.? Is that original paint???? where is the oil

https://www.facebook.com/marketplace/item/3578888055767881/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3Ae869c67d-bbce-4d8c-b53c-a0fa4198d080 looks like I should clean

Hi, Just got a new to me Atlas MFB mill. Its serial number is 007449 and I would be thrilled to learn its date or approximateb date of manufacture. Thanks for any insights. -Rick

I agree with Andrei: get an inexpensive laser tach and eliminate the guesswork. I’ve been doing this for so long that I usually just “eyeball” the speed and take a test cut. Between my habits

Sure would be nice to see things built to last in these days . Now a days if ya have something last more than a year or 2? folks are tellin ya it's time to replace it . When the club buried a friend

Oh, yes, this is a tank of a rotary tumbler. The base is either ? or 3/8 steel. It was bent to shape, not cut and welded. They must have used a big ass press to do that. The rollers are specially

Likewise! I've got a digital RPM gage, but it's a contact type. Also an old mechanical contact type that probably needs a bit of refurbishment. :) Lots of stuff around here like that, including

Sounds like? it was built to last . My first one , the one I built? I used? 2 3/4 rods with rubber hose I slid on in between 2 pillow blocks for each shaft mounted to a piece of thick? plywood?

For the 9 bucks it costs for a new laser tach, I'd say, just buy one and enjoy its accuracy. ________________________________ Sent: Tuesday, September 12, 2023 2:25 PM To: [email protected]

It has a single speed gearbox that I took off and put a belt with pulleys (that is all I had on hand). Last week I finally had the time (after 3 years) to clean out the gearbox and wash it off with

Is yers a store bought or a home brew ? I can't say I've ever seen a store bought with VS . animal

I have a pretty nice expensive hand tach , that's reflective or mechanical That only works on the mechanical side . I need to get inside it & see ifin I can find the problem . animal

Change belts on pulleys. Have not found a reason to do more. ________________________________ Sent: Tuesday, September 12, 2023 1:51 PM To: [email protected] <[email protected]>

You can always try it, but I think that unless you can ensure the laser beam is reflected back within a few degrees of 0, you might not get any counts. The laser is bounced of the tape after each

I'm just curious , were ya planing on changing pulleys or a variable speed motor ? All of mine are just on/off , I never considered if I should be changing the speed of them . My first one the one I

Not really. I am too lazy ? Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ Sent: Tuesday, September 12, 2023 1:40:53 PM To: [email protected]

I think / wonder if ya can get my with just super polishing a small area instead of usin the tape . I've seen some kinda gungy tape still work ? animal

Andrei , do ya change the speeds on your tumbler . I've always let my just run . animal