Hello everyone
Is anyone familiar with clearing the internal memory??
I can¡¯t find any info in the book?
My card still says I have plenty available. But am I correct?
in assuming this has nothing to do with the internal memory?
As it stands I can¡¯t do anything in regards to recording?
Any help or thoughts are greatly appreciated
Thanks Dan?
|
Re: comparing RM1X and QY70/100
Never used a RM1X, but I know it allows to record patterns in real-time, something strongly needed on the qy series. However, no harmonic transposition on the RM1X.
toggle quoted message
Show quoted text
On Mar 14, 2021, at 10:40 AM, QYedit via groups.io <domgoold@...> wrote:
?anyone out there have a RM1X as well as a QY70/100 ?
i wasn't looking at hardware when the RM1X was new, so it's a fairly recent discovery.
similar concept, and XG also, with its own factory styles, more 'sections', etc etc
it is making me focus more on 'phrases', which i've tended to overlook on the QY.
|
Thanks for reply i try but my QY70 still dead.
|
comparing RM1X and QY70/100
anyone out there have a RM1X as well as a QY70/100 ?
i wasn't looking at hardware when the RM1X was new, so it's a fairly recent discovery.
similar concept, and XG also, with its own factory styles, more 'sections', etc etc
it is making me focus more on 'phrases', which i've tended to overlook on the QY.
|
Re: Additional Patterns for QY100
Thanks. These look very interesting.
|
Re: Additional Patterns for QY100
apparently MASSES :o)
look at the other links.
site here:
if you can get along with something like CasmEdit, you might be able to adapt styles for other yamaha keyboards.
|
Additional Patterns for QY100
Hi
Does anyone know if there are additional patterns that can be downloaded for the QY100. If so where can I find them? I would like more Latin, Blues and maybe R&B styles.
Thanks all.
|
First thing I would do is open it up and check for battery leak. ?If so then a full cleaning with alcohol or contact cleaner (where appropriate).
["The longest journey starts with the first step."?- Lao Tzu]
toggle quoted message
Show quoted text
On Mar 12, 2021, at 1:35 AM, marceloalejandrovarela@... wrote:
?I have a trouble with my beloved QY70 , when i turn on the screen show short anim and freezes with QY70 logo, nothing more. I try reset with usual key combinations but only show a clear screen if i press reset buttons song+patt+>> even with other combination oct up +oct dwn + F1 nothing. I start to change the old caps but not all , only some.
Anyone can help me?
Txs
--
¡°The longest journey starts with the first step." ?- Lao Tzu
|
I have a trouble with my beloved QY70 , when i turn on the screen show short anim and freezes with QY70 logo, nothing more. I try reset with usual key combinations but only show a clear screen if i press reset buttons song+patt+>> even with other combination oct up +oct dwn + F1 nothing. I start to change the old caps but not all , only some.
Anyone can help me?
Txs
|
Re: revisit QY editor templates for Novation RemoteSL
Interesting and following.
I actually have a ZeroSL1 which I have for my Micron.
Never thought to mangle the QY as its more my SEQ than SoundSource.?
Are the links in the yahoo archives? (I seem to remember d/ling some from somewhere)
|
revisit QY editor templates for Novation RemoteSL
like a lost mayan temple in the jungle, ... this came up today, with links for download.
waaaay back in ?2015? Eric delivered a prodigious RemoteSL mapping mega-multimix for the QY70/100 :-D
it was not without some little flaws, but i can attest that it works - i don't know how many people tried it out at the time,
and tbh the prospect of reworking and refining it at that point was a little bit overwhelming (!)
(i went off and briefly examined the prospect of doing something in Ctrlr, and then went on a huge detour learning Lua
scripting language/coding)
i think it was done for mk1 RemoteSL (which i have, dual LCD screen seeming preferable).
do any of you have a Novation RemoteSL ? (mk1)
Eric, you pulled this, i think, at some point while the Yahoo group still existed. any reason why?
do you have any objection to posting the links now? - i think it bears a revisit, for anyone with the courage haha
i also picked up a RM1x not long after, so i shifted my attention to that a bit. and kinda burned out on programming
anything, having to end Ctrlr programming abruptly to concentrate on pressing real-life matters, since which i seem
to have lost the appetite for that kind of thing. :-/
the midiCC stuff is straightforward, but it got interesting with the sysex, and seeing what bits of the sequencer operation
could be accessed - and then we found out the Styles could only be selected by SongSelect system message F3h,
which is neither CC nor sysex, and not available on most controllers.
AKAIK there is no RemoteSL template set for Yamaha XG out there. this 'Ultimate QY' set could be the basis for offshoots,
using fewer than the *39* pages used? - ?curated responsibly in the files here? - if anyone has the stomach to re-examine
and maybe come up with specific smaller templates for particular aspects of the whole - which is probably the most elaborate
set of RemoteSL templates anyone has made, ever LOL
i pulled my ZeroSLmk1 out for the first time in ages the other day, and it has something else on it now, but i don't mind loading
it up again, with the *.blk file, and exporting individual pages. wish i was more organised and could provide a video or some
evidence of it interacting with the QY.
Eric? any thoughts?
|
Re: Corrupted/scrambled QY100 LCD screen
Cool, good info. ?Please let us know how it goes!
Good Luck!
["The longest journey starts with the first step."?- Lao Tzu]
toggle quoted message
Show quoted text
On Mar 4, 2021, at 8:34 PM, Matt M. <matt.montag@...> wrote:
? Thanks Eric.?
The two large Yamaha chips do get pretty hot on my QY100.?
Going to try replacing the electrolytic capacitors, since people say they are the primary component that goes bad over time and under heat stress.?
Ordered a set of replacement capacitors for the QY100 from Mouser. In case it comes in handy for somebody else:
| Line Number |
Mouser?Part Number
Customer Part Number
Manufacturer Part Number
Description |
Quantity |
Unit Price
(USD) |
1 |
UUT1C470MCL1GS
16volts 47uF |
8 |
0.187 |
2 |
EEE-HC1C101XP
100UF 16V |
4 |
0.233 |
3 |
EEE-HB1C100R
10uF 16V |
7 |
0.126 |
4 |
EXV105M050A9BAA
50V 1uF 20% |
3 |
0.173 |
5 |
UWT1V3R3MCL2GB
35volts 3.3uF |
3 |
0.290 |
6 |
UUL1E100MCL1GS
25volts 10uF |
1 |
0.630 |
7 |
EDH476M6R3S9DAA
6.3V 47uF 20% |
1 |
0.380 |
8 |
UST1V4R7MDD
35volts 4.7uF |
1 |
0.210 |
9 |
UMT1C100MCD2
16volts 10uF |
1 |
0.280 |
Note this list does not include the two large radial pin 470 ?F (25v and 16v) caps since I had those on hand. Replacing those two alone did not fix the problem.
--
¡°The longest journey starts with the first step." ?- Lao Tzu
|
Re: Corrupted/scrambled QY100 LCD screen
Thanks Eric.?
The two large Yamaha chips do get pretty hot on my QY100.?
Going to try replacing the electrolytic capacitors, since people say they are the primary component that goes bad over time and under heat stress.?
Ordered a set of replacement capacitors for the QY100 from Mouser. In case it comes in handy for somebody else:
| Line Number |
Mouser?Part Number
Customer Part Number
Manufacturer Part Number
Description |
Quantity |
Unit Price
(USD) |
1 |
UUT1C470MCL1GS
16volts 47uF |
8 |
0.187 |
2 |
EEE-HC1C101XP
100UF 16V |
4 |
0.233 |
3 |
EEE-HB1C100R
10uF 16V |
7 |
0.126 |
4 |
EXV105M050A9BAA
50V 1uF 20% |
3 |
0.173 |
5 |
UWT1V3R3MCL2GB
35volts 3.3uF |
3 |
0.290 |
6 |
UUL1E100MCL1GS
25volts 10uF |
1 |
0.630 |
7 |
EDH476M6R3S9DAA
6.3V 47uF 20% |
1 |
0.380 |
8 |
UST1V4R7MDD
35volts 4.7uF |
1 |
0.210 |
9 |
UMT1C100MCD2
16volts 10uF |
1 |
0.280 |
Note this list does not include the two large radial pin 470 ?F (25v and 16v) caps since I had those on hand. Replacing those two alone did not fix the problem.
|
Re: Corrupted/scrambled QY100 LCD screen
I would start with the most obvious ones. ? and definitely practice on a junk circuitboard first¡ You do not need to replace them with surface mount capacitor¡¯s¡ Regular electrolytic capacitors work just as well and are easier¡ Just make sure to match the value and the polarity correctly.
I have never done this myself but I have seen posts of it on other devices¡ I do have one that I could try but I am not sure if the problem is the capacitors or not, since one of the chips gets extremely warm after a few minutes¡ it does have a repeating pattern on the screen Sometimes, other times it¡¯s just blank. ? Since I have another one, ? for now I just keep it around in case I need extra parts.?
["The longest journey starts with the first step."?- Lao Tzu]
toggle quoted message
Show quoted text
On Mar 1, 2021, at 8:21 PM, Matt M. <matt.montag@...> wrote:
?Hello, hello.
Yes, I am using a decent 12V DC adapter, not the 6V it came with.
I left it plugged in to warm up (under a blanket for good measure), and after about an hour, the screen changed, still garbled but with some numbers in the corner. Not only that but it makes piano sounds when I play it!
So, I'm wondering if this is another sign of capacitor plague: if the electrical properties change when the capacitors heat up, and then things start working.
Does anybody know if the surface mount capacitors *all* need to go? There are so many.
Thanks for joining me on this journey ?.?
--
¡°The longest journey starts with the first step." ?- Lao Tzu
|
Re: Corrupted/scrambled QY100 LCD screen
Hello, hello.
Yes, I am using a decent 12V DC adapter, not the 6V it came with.
I left it plugged in to warm up (under a blanket for good measure), and after about an hour, the screen changed, still garbled but with some numbers in the corner. Not only that but it makes piano sounds when I play it!
So, I'm wondering if this is another sign of capacitor plague: if the electrical properties change when the capacitors heat up, and then things start working.
Does anybody know if the surface mount capacitors *all* need to go? There are so many.
Thanks for joining me on this journey ?.?
|
Re: Corrupted/scrambled QY100 LCD screen
To me it looks like a capacitor plaque issues... if you are lucky the offending capacitor could be obviously leaking/leaked or very warm to the touch... ?often there are no signs...sometimes one of the chips get really hot so touch those too to see if they get excessively warm... ? look for leaked caps first though.
--
¡°The longest journey starts with the first step." ?- Lao Tzu
|
Re: Corrupted/scrambled QY100 LCD screen
Low voltage imput. Use 9 to 12 volts to wakeup system
[Edited Message Follows]
[Reason: Added photo link.]
I tried the factory reset, with no luck. It's a low-level problem and the operating system is not booting.
Also, this QY100 shipped with a big 2 Amp DC adapter that only puts out 6 volts.
Maybe this low voltage thing damaged the power regulator. Could I test that theory somehow?
Here is a photo:
|
Re: Corrupted/scrambled QY100 LCD screen
I tried the factory reset, with no luck. It's a low-level problem and the operating system is not booting.
Also, this QY100 shipped with a big 2 Amp DC adapter that only puts out 6 volts.
Maybe this low voltage thing damaged the power regulator. Could I test that theory somehow?
Here is a photo:
|
Re: Corrupted/scrambled QY100 LCD screen
If you havent already might be worth giving this a shot
On Sunday, 28 February 2021, 19:41:41 CET, Matt M. <matt.montag@...> wrote:
Hello everyone, I have just acquired a dead and broken QY100. It turns on and is stuck at this garbled LCD screen with a repeating pattern.? No button response. Is this symptomatic of failing capacitors? How can I bring this thing back to life? I have decent soldering tools, and a multimeter that I don't really know how to use. :) ? ![IMG_3022.jpg]() Thanks,
|
Corrupted/scrambled QY100 LCD screen
Hello everyone, I have just acquired a dead and broken QY100. It turns on and is stuck at this garbled LCD screen with a repeating pattern.? No button response. Is this symptomatic of failing capacitors? How can I bring this thing back to life? I have decent soldering tools, and a multimeter that I don't really know how to use. :) ? Thanks,
|
Eric
squishy
Matt M.
Pandemio