开云体育

I just got back from using my FT-857D and FC-40 in N. Maine on a canoe trip. I used the FT-857D on battery (with a 14W solar pannel) and the FC-40 connected to a random wire (~30-33m) most of the

I'm constantly in a state of confusion. ;-) I use an ATAS-120 with my FT-857D in my truck and am really happy with it. I know there are better screwdriver antennas but the ATAS-120 is simple to

I'm pretty new at this, been reading up what I can about tuners & stuff. I'm also a bit overwelmed by all the advertising about this tuner, that tuner, and I'm a little confused... Is there a

I GOT MY FC-20 WHEN I PURCHASED MY FT-847 AND IT HAS WORKED WELL ALL OF THE TIME. IT, OR THE FT847 DOES HAVE A COUPLE OF QUIRKS. IF I SHUT OFF/DISABLE THE TUNER WITH THE TUNE BUTTON ON THE 847 AND

Bought them in a local electronic store downtown Munich. ----------------------------- Hanno Vogels, DG8JZ eMail: Hanno@... WIRES. #7124D Echolink: #4904 phone: +49 8102 729600 fax: +49 8102

Where did you get the connectors? female, 15m / tested with the distance of [mailto:YaesuTuner@...] Im

Andy Feel fre to start discussion about the FC-20, I have been interested in that tuner in the past but never bought one.

THIS GROUP IS VERY INTERESTING, BUT DOES ANYONE KNOW IF THERE IS AN FC-20 GROUP? I CAN'T SEEM TO FIND ONE ON YAHOO. TNX!! 73 N1CJG ANDY

Friends, I did it! I bought a set of connectores Din 8 Mini male and female, 15m / ~50 feet 8-wire and soldered the extension cable myself. Now tested with the original cable plus the extension....and

Yaesu USA do have a replacement cable part no. T9101543A and sells for $34.81 plus tax and shipping. This is again 15ft if you cannot find the plugs yourself...........73s Roger G3YBO

Okay, thank you... will go downtown Munich and will try to get the 8pin connectores and will solder a new cable myself. Belkin answered my mail and confirmed that the suggested cables are no longer

Yes the pins are 1-1, 2-2,3-3 etc.............Roger

The original FT-897 CAT/Tuner control cable pins are 1-1, 2-2, etc also the metal shield or metal ring on the connector has continuity end to end. 73, Pat KD1XX original straight?

I have checked the site and the cable is available at $8.99 for a 10ft cable.............Roger

This eight-pin "Mini-DIN" control cable appears to be similar to the Apple Macintosh serial printer cable for their ImageWriter printer but, like most bi-directional printer cables, one or two wires

Whow... thank you for the "bad" news just in time. Do you have your original cable still available? Can you check if the original cable is straight? 1:1; 2:2 etc. My cable... the short one... is

to cable. from a Im

Any info on the use of the FC 40 withe a FT 897 and portable antennas. I go away and find the antenna is always a problem in Hotels......Any length of wire found to be good for 40 and

Good Morning, I have similar plan to do. Will buy such a spare cable and will try to expand it with some other cables. I do not want to cut the original cable. Will keep you informed as soon as I get

Hi all. Newbie here. Just got the FT 857 and the ATAS 120 with a Comet CF530 Duplexer. Just wondering if anyone had any experience with the ATAS 120? It auto-tunes on most bands however a little