ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
esc to dismiss
Thank you both for the suggestions! ?I have a new battery on the way.?
73,
Tad, K3TD
On Sun, Sep 3, 2023, at 3:45 PM, Clyde Lambert wrote:
May I seigjest trying a surch on Amazon. I found also HRO listening them.?
I get batteries for my VX-7R on Amazon and on Batteries America.?
Clyde Lambert KC7BJE?
On Sun, Sep 3, 2023, 11:07 AM Tad Danley K3TD < tdanley@...> wrote: Found my VX-8R and accessories when going through a hall closet today,
along with a couple Kenwood VHF and UHF commercial dash mount mobiles
programmed for 2 meters and 440 MHz - all in like new condition.? They
had been locked away in a tupperware container since 2015!? I will want
a new battery for sure - can anyone recommend a source?
Thanks and 73,
--
Tad Danley, K3TD
|
I just purchased from amazon about a month ago, and have had great results. If interested I will?look up the vendor I dealt with. Otherwise I have found the price just a bit too prohibitive for me to get the Branded battery. Sincerely, ?Mr. Chris A. Robinson? ?KF6NFW / WQOQ661
May I seigjest trying a surch on Amazon. I found also HRO listening them.? I get batteries for my VX-7R on Amazon and on Batteries America.? Clyde Lambert KC7BJE?
On Sun, Sep 3, 2023, 11:07 AM Tad Danley K3TD < tdanley@...> wrote: Found my VX-8R and accessories when going through a hall closet today,
along with a couple Kenwood VHF and UHF commercial dash mount mobiles
programmed for 2 meters and 440 MHz - all in like new condition.? They
had been locked away in a tupperware container since 2015!? I will want
a new battery for sure - can anyone recommend a source?
Thanks and 73,
--
Tad Danley, K3TD
|
May I seigjest trying a surch on Amazon. I found also HRO listening them.? I get batteries for my VX-7R on Amazon and on Batteries America.? Clyde Lambert KC7BJE?
On Sun, Sep 3, 2023, 11:07 AM Tad Danley K3TD < tdanley@...> wrote: Found my VX-8R and accessories when going through a hall closet today,
along with a couple Kenwood VHF and UHF commercial dash mount mobiles
programmed for 2 meters and 440 MHz - all in like new condition.? They
had been locked away in a tupperware container since 2015!? I will want
a new battery for sure - can anyone recommend a source?
Thanks and 73,
--
Tad Danley, K3TD
|
Found my VX-8R and accessories when going through a hall closet today, along with a couple Kenwood VHF and UHF commercial dash mount mobiles programmed for 2 meters and 440 MHz - all in like new condition.? They had been locked away in a tupperware container since 2015!? I will want a new battery for sure - can anyone recommend a source?
Thanks and 73,
--
Tad Danley, K3TD
|
VX-8R Clock stuck in 12Hr mode
This worked before I pulled the battery pack then replaced it but now it wont let me set the time in 24 Hr format.? It keeps time and date fine if 12 Hr format, I have no GPS but its set to Manual, GPS Time Zone is UTC +0:00, in Set Mode I follow the manual, changing date, time, and hitting Mode Key till its on Set, then hit the V/M key, it beeps after the V/M key press, then I hit PTT.? If I enter anything in 24 Hr mode it wont except it or reverts to 00:00 if between 13:00 and 24:00.? Is there some setting I’m missing or some procedure to set the format to 24 Hr ?? ? Maybe the internal clock battery is toast but doubt that could cause it to not accept a 24 Hr time format. ? I sent same question to Yaesu as well to see if anyone has a clue. ? Any help appreciated, ? Brad K8ZM
|
If you live near Santa Clara, I can program the radio for you using my VX-8R DIY cable and CHIRP. ?I think I bought some other software too. ?I believe the settings are also available along with the memories.
toggle quoted message
Show quoted text
On Aug 12, 2023, at 10:48 AM, Terry W7AMI <terry.w7ami@...> wrote:
It can be programmed without a cable. ?
For info on setting up the GPS functions try checking out this web page.
| |
On Aug 8, 2023, at 11:36 PM, Kevin B <buchholz676@...> wrote:
Hello,
I got a used radio from the family of someone who had passed. I turned the B channel to aprs and it beaconed his call sign onto aprs fi. I figured I'd do a reset rather than finding all the stuff tied to his call sign. Thinking back I should have just replaced the callsign and edited saved memories.?
Now when I put the unit into goa display mode by pushing menu (I think, going off memory) it just flashed like it can't get a GPS signal. GPS power I believe it's called is turned to on. I'm sure are.lotsnof.settimg but any idea why? Also, can this be fully setup without a cable? I forget the setting i couldn't figure out how to change but one of the text settings it wouldn't allow me to edit any fields.
I also have a FTM-400 and it might be doing the same. That radio is in the shop so might be blocked but it is in the window so I wouldn't think so. The HT was outside with a very clear view up.
Thanks
It can be programmed without a cable. ?
For info on setting up the GPS functions try checking out this web page.
| |
toggle quoted message
Show quoted text
On Aug 8, 2023, at 11:36 PM, Kevin B <buchholz676@...> wrote:
Hello,
I got a used radio from the family of someone who had passed. I turned the B channel to aprs and it beaconed his call sign onto aprs fi. I figured I'd do a reset rather than finding all the stuff tied to his call sign. Thinking back I should have just replaced the callsign and edited saved memories.?
Now when I put the unit into goa display mode by pushing menu (I think, going off memory) it just flashed like it can't get a GPS signal. GPS power I believe it's called is turned to on. I'm sure are.lotsnof.settimg but any idea why? Also, can this be fully setup without a cable? I forget the setting i couldn't figure out how to change but one of the text settings it wouldn't allow me to edit any fields.
I also have a FTM-400 and it might be doing the same. That radio is in the shop so might be blocked but it is in the window so I wouldn't think so. The HT was outside with a very clear view up.
Thanks
Hello,
I got a used radio from the family of someone who had passed. I turned the B channel to aprs and it beaconed his call sign onto aprs fi. I figured I'd do a reset rather than finding all the stuff tied to his call sign. Thinking back I should have just replaced the callsign and edited saved memories.?
Now when I put the unit into goa display mode by pushing menu (I think, going off memory) it just flashed like it can't get a GPS signal. GPS power I believe it's called is turned to on. I'm sure are.lotsnof.settimg but any idea why? Also, can this be fully setup without a cable? I forget the setting i couldn't figure out how to change but one of the text settings it wouldn't allow me to edit any fields.
I also have a FTM-400 and it might be doing the same. That radio is in the shop so might be blocked but it is in the window so I wouldn't think so. The HT was outside with a very clear view up.
Thanks
|
Re: VX-_7R Memory Alpha Tags
Thank you!!!! This solved my issue!
Very 73 Leslie
On Tuesday, July 18, 2023 at 08:11:02 PM CDT, pcunite <pcunite@...> wrote:
To view Memory Channel names:
1:
Long press the Main key until only one band is visible. This is a toggle. So, if you see two bands, long press again to show only one band.
2:
Short press the V/M key to ensure you are in Memory mode. This is a toggle. Short press until MR is displayed.
3:
Short press the MonF key, then press the Main key. This toggles showing large characters vs name tags.
|
Re: VX-_7R Memory Alpha Tags
To view Memory Channel names:
1:
Long press the Main key until only one band is visible. This is a toggle. So, if you see two bands, long press again to show only one band.
2:
Short press the V/M key to ensure you are in Memory mode. This is a toggle. Short press until MR is displayed.
3:
Short press the MonF key, then press the Main key. This toggles showing large characters vs name tags.
|
Yaesu VX-7R RF Power MOSFET
Hello Members -
Yaesu VX-7R or similar Radio.
I would interest in hearing from someone whom has ever replaced Q1027 p/n 2SK3476? - RF Power MOSFET.
One attachment, (.pdf) file.
Thank you in advance.
|
Re: VX-8R Xmit Band A opens squelch on Band B
Thanks Tad, ? I wanted to review all the settings and then re-program it as well as do some testing to insure its working “as it should” before I did a full factory re-set.? I was curious if anyone had experienced what I was. ? Thanks for the reply !! ? 73, Brad K8ZM ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Tad Danley K3TD
Sent: Sunday, June 18, 2023 1:05 PM
To: [email protected]
Subject: Re: [Yaesu-VX-7R-VX-8R] VX-8R Xmit Band A opens squelch on Band B? Hi Brad, congratulations on the VX-8R!? I can't help you with any specific settings, but any time I purchase a used programmable radio I perform a reset once I have determined the TX and RX basic functions work properly. 73, Tad Danley, K3TD On 6/17/2023 2:41 PM, Brad, K8ZM wrote: I have acquired a used VX-8R, it was heavily used for APRS.? I have not done a factory reset (yet).? I have cleared all the APRS settings I can find, including the use of the RT Systems VX8 Programmer, I have also cleared all the memories and programmed new ones for my local area.? When I transmit on Band A, immediately after I let up the PTT key, I get what amounts to a squelch tail on Band B.? Have I missed an obvious setting ?? ? I’m not new to the VX series HT’s, I used to own a VX-7R a few years ago and was my GoTo Handheld for quite some time. ? Thanks for any input, ? 73 Brad, K8ZM
|
Re: VX-8R Xmit Band A opens squelch on Band B
Hi Brad, congratulations on the VX-8R!? I can't help you with any
specific settings, but any time I purchase a used programmable
radio I perform a reset once I have determined the TX and RX basic
functions work properly.
73,
Tad Danley, K3TD
On 6/17/2023 2:41 PM, Brad, K8ZM wrote:
toggle quoted message
Show quoted text
I have acquired a used VX-8R, it was
heavily used for APRS.? I have not done a factory reset
(yet).? I have cleared all the APRS settings I can find,
including the use of the RT Systems VX8 Programmer, I have
also cleared all the memories and programmed new ones for my
local area.? When I transmit on Band A, immediately after I
let up the PTT key, I get what amounts to a squelch tail on
Band B.? Have I missed an obvious setting ??
?
I’m not new to the VX series HT’s, I
used to own a VX-7R a few years ago and was my GoTo Handheld
for quite some time.
?
Thanks for any input,
?
73 Brad, K8ZM
|
Re: Need help identifying an antenna please
I'm glad I was able to help.. 73
|
VX-8R Xmit Band A opens squelch on Band B
I have acquired a used VX-8R, it was heavily used for APRS.? I have not done a factory reset (yet).? I have cleared all the APRS settings I can find, including the use of the RT Systems VX8 Programmer, I have also cleared all the memories and programmed new ones for my local area.? When I transmit on Band A, immediately after I let up the PTT key, I get what amounts to a squelch tail on Band B.? Have I missed an obvious setting ?? ? I’m not new to the VX series HT’s, I used to own a VX-7R a few years ago and was my GoTo Handheld for quite some time. ? Thanks for any input, ? 73 Brad, K8ZM
|
Re: Need help identifying an antenna please
The original antenna is 3 pieces.? The smallest piece attached to the longest antenna is used at 144..440 mhz.? The second long track is used at 50mhz.? Mine was destroyed, luckily I was able to find a new original antenna set at HRO Anaheim.? Small parts screwed to the end may loosen from the connection point and fall to the ground and get lost.? be careful. TA1CT 73
|
Re: Need help identifying an antenna please
Leslie and George, THANK YOU for the info!? You messages jogged
my memory, and I remembered that the VX series of portables with 6
meter capability standard all came with the same antenna in 3
parts:? The main part approx 7" long seen below in my photo with a
threaded tip, a very short top section for use on 2/222/440 (which
I have misplaced over the years), and 3.5" loaded top section for
use on 6 meters.? My two pieces are meant for 6 meters and work
with my VX-6R modified to work on 6 - and also work fine on
2/222/440.? My stock VX-6R antenna is 7.75" long for 2/222/440 in
case I want a shorter antenna on those bands.
73,
Tad Danley, K3TD
On 6/9/2023 2:47 PM, Tad Danley K3TD
wrote:
toggle quoted message
Show quoted text
Over the years between 2005 - 20015 I owned a VX-6, 7 and 8 at
various times, and sold them all several years ago.? I just
purchased a VX-6 and added the Comet HT-224 antenna for 2/222/440.
In my junk box I came across the antenna pictured which I'm sure
was for my previous VX-6, 7 or 8 - and wonder if anyone knows what
it is and what bands it covers?? It has the same SMA connector as
my Comet so fits on the new VX-6 and I am assuming would fit on
the 7 and 8 as well  .
Thanks in advance for any ideas on what this is!
73,
Tad, K3TD
|
Re: Need help identifying an antenna please
I have an old VX-7 and that looks like the original antenna that comes with the radio.
Good luck, George
K6GKS
|
Re: Need help identifying an antenna please
Tad: I may be wrong but I believe the upper antenna is the stock antenna with the cap removed. For 50MHz, you would screw the smaller antenna on top of the main antenna.
GL 73 Leslie
On Friday, June 9, 2023 at 01:47:06 PM CDT, Tad Danley K3TD <tdanley@...> wrote:
Over the years between 2005 - 20015 I owned a VX-6, 7 and 8 at various times, and sold them all several years ago.? I just purchased a VX-6 and added the Comet HT-224 antenna for 2/222/440. In my junk box I came across the antenna pictured which I'm sure was for my previous VX-6, 7 or 8 - and wonder if anyone knows what it is and what bands it covers?? It has the same SMA connector as my Comet so fits on the new VX-6 and I am assuming would fit on the 7 and 8 as well   . Thanks in advance for any ideas on what this is! 73, Tad, K3TD
|
Need help identifying an antenna please
Over the years between 2005 - 20015 I owned a VX-6, 7 and 8 at various times, and sold them all several years ago.? I just purchased a VX-6 and added the Comet HT-224 antenna for 2/222/440. In my junk box I came across the antenna pictured which I'm sure was for my previous VX-6, 7 or 8 - and wonder if anyone knows what it is and what bands it covers?? It has the same SMA connector as my Comet so fits on the new VX-6 and I am assuming would fit on the 7 and 8 as well   . Thanks in advance for any ideas on what this is! 73, Tad, K3TD
|
Clyde Lambert
Brad, K8ZM
pcunite
AJ4UY