开云体育

I'm very sorry about your father being a silent key, Michael.

Hello All: I just joined the group.? I see it is not very active. I have a VX-7R which is the first radio I bought when I got my ticket. It has been mostly resting in a closet for some years. I

I am following this. i have the RT systems sw for this, and believe this is mostly resolved there, but I dont recall, its been a while since I picked this radio up as well. maybe its time to

It is really a great little radio. I guess I just got busy and it went into storage.I know it worked previously.I am thinking it is how I am calling up the memory station but have not resolved it

To view tag you need to be in single vfo mem mode by using the main n sub buttons to select single vfo hold one of them in for a few seconds. Also check when in v/m memory mode menu “Basic setup

Yes sir. I had the opportunity to look at the radio last evening. Single VFO memory mode.No alpha tags. Single VFO MG mode.No alpha tags. Going the set up menu:I can see the channels and alpha

Over the years between 2005 - 20015 I owned a VX-6, 7 and 8 at various times, and sold them all several years ago.? I just purchased a VX-6 and added the Comet HT-224 antenna for 2/222/440. In my

Tad:I may be wrong but I believe the upper antenna is the stock antenna with the cap removed.For 50MHz, you would screw the smaller antenna on top of the main antenna. GL73Leslie

I have an old VX-7 and that looks like the original antenna that comes with the

Leslie and George, THANK YOU for the info!? You messages jogged my memory, and I remembered that the VX series of portables with 6 meter capability standard all came with the same antenna in 3

The original antenna is 3 pieces.? The smallest piece attached to the longest antenna is used at 144..440 mhz.? The second long track is used at 50mhz.? Mine was destroyed, luckily I was able to

I have acquired a used VX-8R, it was heavily used for APRS. I have not done a factory reset (yet). I have cleared all the APRS settings I can find, including the use of the RT Systems VX8

I'm glad I was able to help.. 73

Hi Brad, congratulations on the VX-8R!? I can't help you with any specific settings, but any time I purchase a used programmable radio I perform a reset once I have determined the TX and RX basic

Thanks Tad, I wanted to review all the settings and then re-program it as well as do some testing to insure its working “as it should” before I did a full factory re-set. I was curious if

Hello Members - *Yaesu VX-7R* or similar Radio. I would interest in hearing from someone whom has ever replaced Q1027 p/n 2SK3476? - RF Power MOSFET. One attachment, (.pdf) file. Thank you in

To view Memory Channel names: 1: Long press the *Main* key until only one band is visible. This is a toggle. So, if you see two bands, long press again to show only one band. 2: Short press the

Thank you!!!!This solved my issue! Very 73Leslie

Hello, I got a used radio from the family of someone who had passed. I turned the B channel to aprs and it beaconed his call sign onto aprs fi. I figured I'd do a reset rather than finding all the

It can be programmed without a cable. For info on setting up the GPS functions try checking out this web page. https://kk4nqq.blogspot.com/2013/07/k4kpks-guide-to-yaesu-vx-8gr.html?