开云体育

The old Yahoo messages can be found in the Files section. The File Description - Most of the original messages from the old Yahoo group starting at #1. Edited out the automated monthly messages except

Been battling with this for some time and just today found out that there is an internal rechargeable lithium-ion battery specifically for the clock.? I have the suspicion that this battery is no

Fixed this with no problems.? Just did a backup of the HT to my desktop using RT Systems VX-8 Programmer, did a factory reset of the HT (Hold Band, HM/RV, TX PO, keys down and power up the HT), then

Hi Floyd, So was there no battery to replace in the VX-8DR? Thanks, Joe KE0PSK

According to the maintenance manual, there is a rechargeble Li-Ion battery just for the clock (as I see it. Not much further info) but rather thab take the radio completely apart just to take a look,

I have dug out my vx7r after years of gathering dust. I always loved this radio, especially the battery life. Anyway, I am looking to update the programming with the ADMS 1G software from RT Systems.

I contacted them directly and they sold me an updated version at a lower price than new, also for a VX-7R. As long as you have the original serial number it's practically no issue. WD8DUP/DA1VF

Nora, My version is 5.00.05. Not sure if that is the latest. I upgraded in 2018. You might have to pay for the latest. I have used it with Windows 10. Bruce wd9ghk Sent: Friday, January 15,

I have the newest software, and it does work just fine on win10.

I just opened my software and did an update, it looks like we are at Version 5.0.??? now Sincerely, Mr. Chris A. Robinson KF6NFW / WQOQ661

All correct. My original version didn't even work on Win10, so had to buy new. Then again, my version was XP variant. Was surprised they updated it. WD8DUP/DA1VF kf6nfw@...> wrote:

Nice to see this list spring back to life. I was using my VX-7R in my car as a scanner, and it was often hanging on odd channels.? I stopped using it because of that. I wonder if there is still a

Have you tried a factory reset? My VX-8R was not allowing me to make any changes to menu items. A reset fixed it. I used RT Systems software to do a full backup first then restored the data

I am interested in using it as a scanner, as well. Is it possible to monitor trunked systems in the 800 range? No idea how to program for a trunked system. Nora

No you can not scan trunked systems. At best the VX7r is closer to an analog scanner of the 1980's. It will scan the channles you put in, at a relative slow rate. However, in many areas, such as where

You would be better off using an SDR (like the RTL-SDR) and appropriate software if you want to scan trunked systems. Start at www.rtl-sdr.com and work from there. You'll find all the info you

My VX-5 has suddenly gotten stuck on 144.000 MR channel 1. The squelch stays open even if I set it to 15. Turning the dial knob doesn't do anything. I can push the (MR(SKP)SC) key and it will change

I would try one or both of the suggestions here.? Just sounds to me like the thing has hung up.? Good luck and let us know if either of these

I've already tried both of these & neither helped. Thanks Ken WN7CSI ________________________________ Sent: Tuesday, February 9, 2021 5:08 AM To: [email protected]

new to the VX-7, does anyone know why my radio?Beeps immediately after pushing the PTT. it doesn't seem to matter what channel i am on or if the channel. is busy or free. It beeps every time i