开云体育

If I use the YD8116 to switch my MP5 points, will the switch notify iTrains? Secondly, if I use a physical momentary push button switch on the layouts mimic panel to activate the MP5 driven point, does iTrain recognise via the YD8116 that the point switched manually? Thanks in anticipation, Peter

Hi All, I am currently using Diigtrax hardware, but as I get deeper into this area I am considering changing direction - with YaMoRC being a lead contender. My question is how much of my current Digitrax equipment I could continue to use via connection to a YD7100+YD7101 Set. In terms of Digitrax equipment I currently have: DCS210+ command station / booster BXP88 occupancy detectors DS74 stationary decoders I like the Digitrax transponding feature, but I see the YaMoRC kit supports RailCom and assume that would provide the same or better functionality. This may be a stupid question - If you can connect the BXP88 units to YaMoRC would the RailCom signal still pass through to the command station? I am also trialing iTrain on a MacBook Air. I understand YaMoRC is compatible with Mac and I assume it interacts well with iTrain? Thanks David

Just did the conversion #DR5000 to #YD7001. All good, except when I connect my Windows Laptop via WiFi to YD7001-D00#####-AP I have a connection but no Internet connection. The YD7001 is connected to the LAN Ethernet fine with the settings as per the setup instructions. Also, same on my iPhone when connected to WiFi - The Z21 app on iPhone works fine and I can control trains. But I have no internet connection on the iPhone. It's like it isn't passing through the wiFi connection to the LAN. Where should I be looking to fix this, or am I missing something here?

Hello This is my first post to this group. I am hoping to learn more about some of the features on the YD7001. I have just upgraded my DR5000 to a YD7001 which was very easy and straightforward. I have for over five years had an ECoS 52000 linked to a PC running TrainController Gold using a dedicated router via LAN to connect them together. This has always worked well and I had no problems. However, I wanted to upgrade to a DR5000 and I began to understand how little I know about the various DCC protocols involved. Karst has been very helpful and suggested I use the USB connection to my PC (using Intellibox II as the command station) which will connect to TC. However, I also use the Smarthand optional extra on TC which let me operate the whole layout using smart devices over my routers Wi-Fi. This is where I start to get confused with the YD7001. It has its own internal Wi-Fi, so does this mean I can connect smart phones and tablets to TC via the YD7001. Alternatively, can I connect my old router to the YD7001 and PC as an overlay network and connect smart devices to TC that way. i was also hoping to use LocoNet occupancy detectors using the DR5000 and had started to install them on my layout. However, Karst informed me that TC does not support LocoNet over LAN so that option is out of the question. So, is there a way of achieving everything I want to achieve, or does something have to change? My apologies for for being ignorant on these connectivity issues. Many thanks. Les

Karst, A suggestion, if I may. Since this forum belongs to YaMoRC could you use it as your main English language forum (and/or other language) to make announcements concerning YaMoRC products? For example I have been told that there will be a new release of the YD9401 firmware rendering functional the WiThrottle but I don't know where to look for the announcement update, nor have I been able to find previous warnings. This forum could include such things as: Firmware updates availabilities/announcements, New firmware functionalities/release notes, New product manuals and their versions, or any other thing that you would feel helpful to the YaMoRC community If you so decide it would be helpful if you would indicate the forum address on your Web site. Cordialement et à bient?t Richard Edited on Thursday, 23 March 2023 at 12:11 (GMT + 1) à Paris, France; sent later.

The circuit breaker topic went in an unexpected direction, but I thought I needed some confirmation about another essential requirement - detection. Hence the new topic. Adding in Railcom to a layout design does require at least 1 feedback module for each booster. In general the YD6016LN-RC looks like it will fit my requirements for a Loconet based detector that is both a 3mA current sensor and a Railcom reporter. If I read it correctly it has 16 inputs that would be tied to one booster. That's a lot of inputs that can go to waste. I would rarely use more than 8 of them and often less. For example in comparing it to the Digitrax BDL-168, it has 16 inputs that can be grouped into groups of 4 inputs that can each feed different boosters or circuit breakers if needed. Quite flexible. Also what is the YaMoRC solution for reversing loops?

Hi, I've noticed that both YamoRC and Digikeijs show connecting their command stations directly to the booster and then directly to the feedback modules. What is the recommendation for adding circuit breakers or not? (eg NCE EB1, not PSXX apparently) And if I use a booster wherever I would put a circuit breaker, would I even need a circuit breaker? Thanks.

Will YaMoRC be at the Intermodellbau in Dortmund next month?

Will there be a more detailed manual for the YD8116 ? I'm trying to see how to use the module with Dutch signals on my ECOS and i-Train combo.. ECOS is playing nice, but iTrain confuses me with the settings? BTW.. I LOVE the user interface with the separate config tool!

Since we are in the mood for suggestions, the YaMoRC website "Where To Buy" page does not mention Iron Planet Hobbies as a USA distributor. I am not affiliated with them in any way, but they do list your products on their website.

Check out this excellent installation video on YouTube of the YD9401... https://youtu.be/YPZrcux9kpc

I am new to YaMoRC and was looking to find out what it involved and if the old Digikeijs DR5000 would work with it. Luckily I found this YouTube video that explains the installation of the YD9401 LAN module and upgrading the DR5000 to a YD7001. https://youtu.be/YPZrcux9kpc #yd7001 #dr5000

Any estimation as to a date for an update to the YD9401 software in order to have a working WiThrotte ? Richard Edited on Tuesday, 28 March 2023 at 17:52 (GMT + 2) à Paris, France; sent later.

Hi Does anyone have experience using Digitrax's LNWIs with a YD7001 (a DR500 upgraded using the YD9401 module)? I am trying to establish if this combination works without problems. Our situation: I am asking on behalf or York Railway Modellers in Toronto - I am a member of this club. We have a DR5000 command station and we are using 4 LNWIs to connect via WiFi to it - WiFi throttles are a combination of TCS UWTs and cell phones running Wi Throttle and Engine Driver. Our membership is growing and we will need to add the ability to connect more throttles in the coming months. Capacity can be increased by adding another LNWI or converting the DR5000 to a YD7001, and then using the built in WiFi module or a external router to connect throttles. The delivery or Wi Throttle support for the YD7001 in the last week make it possible to consider the upgrade as a solution to our need to grow. Thank You

Hello Dear Fans The new firmware for YD7001 and YD9401 is ready. You are welcome to download it from: http://www.yamorc.de/downloads/YD_7001-build-55.exe (manually copy the link text into your browser if the link does not work ) To the following procedure: 1. download 2. install (using Next, Next, Finish), if you have already done so you can skip the drivers. 3. update the YD7001's firmware 4. reboot the YD7001 cold after updating (switch off, switch on after 15 sec). Wait until the LED of the YD9401 flashes. 6. Open the WLAN mask and update the firmware + SPIFFS (check the box!). 7. the YD9401 is now set to the new factory settings, repeat the settings as you did after installing the YD9401. After updating, restart the YD7001 cold (switch off, switch on after 15 seconds). And then you are ready to go So what did you get ? 1. the 192.168.4.1 bug fixed 2. full WiThrottle protocol (tested with WiThrottle (iPhone), Engine Driver (Android), TCS hand controller and wiFred). 3. some minor stability improvements in the Z21 protocol, programming track. 4. some cosmetic improvements in the speed controller and LocoNet feedback monitor. 5. protection against unwanted inputs when YD9401 is (re)starting. 6. some sound signals in various screens to indicate when e.g. firmware updates are ready or when the YD9401 is on-line again. 7. quite a few more, rather invisible, unnoticeable IT improvements in the GUI. So. you are cordially invited to try it out ! Greetings, Karst

Hi, I am planning my physical connections to the layout and would like to know the dimensions of the YD6016LN-RC LN Railcom feedback module. According to the website it's not going to be available for a few months yet but I hope to build at least part of the layout connection and just leave space for the module. Thanks in advance....

HI All, I've just upgraded my DR5000 with upgrade module YD9401, so now I have an YD7001. Is there a way to configure the YD8116 (and other modules) with the YD7001, other than setting the first address with the programming button? I have installed the Config SW package, but it only shows icons for YD7000, YD7003 and others, but no YD7001. Will I need to acquire a YD9100 module to benefit from the full-fledge configuration interface for YD8116 (and other similar modules)?