¿ªÔÆÌåÓý

I checked the original schematic.

?

Here you go :)

?

?

Where does that brown wire go ??

To let the YD6016LN-CS to work, it needs to go to the left "C".

But.... if both red and brown go to the bridge, you can not use inputs 2-8 for anything else.

?

Greets,

Karst

?

?

YD7001 handles all the ex-Digikeijs DR5000 REV-A through REV-D

YD7001-E are commandstations directly made by us. ( so no ex-Digikeijs ) and have been modified to a.o. include hardware for measuring input and track-voltages. From the outside the can be identified as having real bright green LEDs instead of the yellowish, dim LEDs on the ex-Digikeijs samples.

?

So... everybody who upgrades with the YD9401, needs to install the YD7001? (without -E)

Greets,

Karst

some of the image may appear black - this is just where I've edited the original image and added the YD6016 image

I have just updated to the YD7001 and noticed that there was also a YD7001-E. Did I pick the correct one and I wondered what the difference is?

Thanks
Alec

Please post a picture how you connected the TT-DEC to the YD6016LN.

Best is a picture of/with both modules.

?

Greets,

Karst

?

Hi all,
I'm trying to use the position received feature of the LDT TT-DEC turntable decoder in conjunction with Rocrail. I have it wired to a YD6016LN using a resistor and diode as per the LDT instructions for the Uhlenbrock 63340 . I don't seem to be able to get it to work. ?Is the YD6016LN suitable for this function? ?The turntable is a Fleischmann 9152, N Gauge.

[YD7001, 2 x DR4088LN, YD6016LN]

I have already generated the ticket.
Thank you very much for the help provided.
Mario

Ok,

?

but then please do this:??

?

I apologize.
I had not seen it.
Of course I am interested in doing it as you indicate. We will send the two plates that a colleague and I bought.
Thank him personally.

On Fri, May 3, 2024 at 09:09 AM, Mario wrote:

Don't you know of a place where I can send the DCC and they can help me with my problem?
Thank you very much for your response.

Did you read at all my answers ????

If not, please do, otherwise you can just throw those boards into the garbage.

I am trying to help you, but this is my last try....

Greets,

Karst

?

Yes, I answered this before:
---------------------------
Right, it's a girl called Eva from the EMS PCBA company.
Please, could someone help me on how to solve the problem I have with this board? It is impossible to find it to buy it in any store, not even second-hand (in this case they ask you for a lot of money and you don't know if what they are going to sell you is broken).
I work for a courier company and they were able to send it and pick it up wherever they told me. Of course I know that I will have to pay for the service.
Please, I was very excited to buy this DCC and it was impossible to find it, especially in Spain. Thank you very much for your help.
A greeting from Spain,
Mario.
---------------------------

Don't you know of a place where I can send the DCC and they can help me with my problem?
Thank you very much for your response.

Are you replying to me ???

I already told you that I have been searching on eBay, Wallapop (Spain) and it has been impossible. I wish I had found it because I am very excited to have said DCC. The one I have is the Roco z21 white but I wanted to have the DR5000 or the YD7001 and as I mentioned before, it was impossible to locate it.
Receive a cordial greeting,
Mario

Mario,

it seems to me you are new in this group.
I really appreciate my name being spelled correctly.

I am the only person in the whole world that can solve your ?problem¡°.

I cannot, legally, turn it into a DR5000.
what I can do, is make it an YD7001-E.

That would cost you €85. wich includes a YD9401 module and the neccesary hardware mods. It does not include shipping back to you.

If you are interested, please contact us here:
greets,
Karst

That is the problem that I have searched everywhere and I have not found it. That's why I saw that option and I took the risk of buying it because there isn't one. That's why I say that if I have to pay to have the bootloader installed, I understand it and I do it and if it has to be sent anywhere, I wouldn't mind because I work for a global courier company and I could do the shipping.
Receive a cordial greeting,
Mario

Thank you very much Kenneth.
Mr. Kurts tells me that the problem is that it does not have firmware or bootloader.
I have to look for a company or someone who can help me install it, of course paying the appropriate amount.
Thank you again very much for your help.
Receive a cordial greeting from Spain
Mario

Good afternoon from Spain.
Right, it's a girl called Eva from the EMS PCBA company.
Please, could someone help me on how to solve the problem I have with this board? It is impossible to find it to buy it in any store, not even second-hand (in this case they ask you for a lot of money and you don't know if what they are going to sell you is broken).
I work for a courier company and they were able to send it and pick it up wherever they told me. Of course I know that I will have to pay for the service.
Please, I was very excited to buy this DCC and it was impossible to find it, especially in Spain. Thank you very much for your help.
A greeting from Spain,
Mario.