开云体育

Which bug – there are lots of them Sent: 08 August 2019 08:38 To: [email protected] Subject: Re: [Digikeijs], JMRI, Rocrail, Itrain, Walthers, Tortise, Cobalt, Switch Machine, Roco, Throttle

Version 1.2.0 released. Bug is fixed! Moreno

Hi, I have probably read misleading information about the combination of turntable controller DR5052, the professional extension set and the Roco turntable 42615. Most say it's not working and some

Excellent! JC Sent from my iPhone 5S

Gentlemen, I got it working! Parameters: - iTrain - interface -? Loconet(S) on COM3 - DR5000 - Z21/WLANmaus - on 192.168.16.254 port 21105 - gateway - DHCP - WLANmaus - 192.168.16.254 - dynamic -

Sorry Iain, they both recommend it over LAN Sent from my iPad Pro

Yes Iain - I’ve found connection quicker and my gigabit Ethernet can be a little temperamental with the virgin super hub (router) I had several issues and James H and Karst D both say use USB

Really? Using LAN on DR5000 never caused me any issues with iTrain Iain Morrison 07767 456746 ________________________________ Sent: Wednesday, July 17, 2019 5:25 pm To: [email protected] Subject:

USB is by far the best connection! Sent from my iPad Pro

How are you connected from the DR5000 to iTrain? Via USB or LAN? Iain Morrison 07767 456746 ________________________________ Sent: Wednesday, July 17, 2019 4:21 pm To: [email protected] Subject:

Is there a way to add a WLANmaus to a DR5000 connected to iTrain? I would like to run an extra train manually. But when i select the DR5000 protocol 'Z21/WLANmaus' I loose iTrain.

Per your post COM4 should be the USB and use the DR5000 App. This will allow you to setup the DR5000 for your use. Download the DR5000 manual either on this site or on the Digikeijs site. Also look

Hi John When you connect the USB cable between your PC and the DR5000, Windoze will allocate three ports for DR command, Loconet and Xpressnet, which should agree with the numbers you see on the

Thanks Ryan, I'll keep trying with it.

Thanks Dennis, Do you mean use COM4 for DR.Command? Or just ignore the lack of DR.Command and just use loconet over usb? Surely, I won't be able to configure Wifi etc. without the DR.Command

John, I disconnect the the DR5000 and remove all previous installations first.? Do a complete fresh install and then connect the DR5000 after the install is done. The PC App should still start even

Welcome. If you are using Loco-net, then set up the DR5000 USB as COM4.? The others you can ignore for now. Dennis

Hi all, I've just got my first Digikeijs product - a shiny new DR5000. However, I'm running into problems configuring it :( I can see (after clicking on the USB port), that Dr.Command is on

Moreno. Thank you for the reply, and yes it is the Android version. I did think that it was strange that the reporteraddress had an upper limit of 20! I wanted to use the current version of the App

I think you are using Android version of the app. aren't you? I already wrote to Roco that In the android version only reporteraddress 1-20 can be set for loconet responsemodule (uhlenbrock or