开云体育

I'm having problems with the reliability when using this combination with iTrain. They occur mostly in automatic mode but do also? when manually operating individual turnouts or when using the track

I have just discovered after adding additional blocks that some of the track when just the sensed rail is touched with my finger it will activate the sensor and generate the message of an active

Fingers crossed that it is soon ?

Hello, Is there any information when this Railcom detector module will be released? Thanks

You need a YD8116 Sent: 24 January 2025 08:34 To: [email protected] Subject: DCC EXT DR4018? I have a YD7001 that I believe supports DCCExt. Can I use DCCExt with a DR4018 or do I

I have a YD7001 that I believe supports DCCExt. Can I use DCCExt with a DR4018 or do I need a ?YD8116? I use ITrain which also supports DCCExt. Roger

well well well looks like i have the same problem with the adsx2 loosing addresses if I use a sprogg3 the problem disapears

I have a small iTrain test bench layout controlled by a YD7001. To control my Blocks I have been using either a DR4088CS or YD6016ES connected directly to the EXTN88 IN port of the YD7001. Whilst this

Pete The number is, as you guessed, used with DCCExt. This allows you to use a single address to make complex signalling done because the decoder does the work rather than you creating a (sometimes)

Hi Iain and Oldngrey, Many thanks for your earlier replies. Well I dived in and bought 7 x YD8116, and the USB to ES link (FTDI) adaptor, and I've had one on the bench and been playing. Thanks

Hi, We are migrating from the DR5000 to the YD7010. ?We have previously controlled switch decoders with the Z21 app on iPad. The DS51K1 decoder does not respond when connected to the YD7010. ?We

I have a PR4, so I am considering using this as a test of whether the S88N conversation is done in the DR4088LN-CS. thanks -- Heath @ Human[c]ity http://www.humancity.org ( http://www.humancity.org/

Hi, I have several YD7403 Boosters on the lower deck of my layout. I will have 2 parallel tracks going up to the upper deck via a helix. The tracks come from different parts of the layout and there

In theory, I think this could work. I doubt that specific combination of devices has been tested before. It may "just work", provided all the devices are configured appropriately. I see you have

Stuart, You name just came up on my discord ( https://discord.gg/tNqrmzX6 ) . We were discussing in throttle consisting versus when the cosist get's sent to the command station so I could grab it

Heath, I would suggest posting this question on the LCC users group. You might get some better suggestions over there. There might be someone who already has, or is willing to help with building, an

I am at the point in my model railroading journey that I want to get away from Digitrax consisting and move to an NCE style system. This means that the upgrade choice would be the TCS CS-105. On my

Perhaps go into the admin of the router and assign the YD7001 a static IP address - the same one that originally worked with the YD7001…. i have windows 11 desktop and i use static IPs because i

Thanks Ian, Was just about to follow your suggestion, I was just using regedit when I read your post.? ?I found some keys removed them thought I would reinstalled and follow your suggestion.? But

Install something like Revo Uninstaller <https://www.revouninstaller.com/> to remove the programs and clear out the registry keys (which it will be display for you) after it has been uninstalled and