开云体育

Apologies Andrew I use 16/0.2 wire if that helps - I’ve checked for any voltage drop - I do get a little but so far all good John XR

No Andrew Max length 5m and nothing to report …….yet John XR

John Do you not get any feedback problems due to cable lengths with the? 4088s being so far from the track berths? Andrew

Thank you Karst That very positive response will now spur me on to complete the upper deck of the layout Much appreciated Johnx XR

Thanks Karst. Kind Regards Alex

Sorry, excuse me. I read it wrongly. Greets, Karst

No second thoughts about that (y) should work nicely ! Very nice cabinets by the way !! Greets, Karst

Well, I think we have seen a pretty nasty example of blindly scaling-up with, a.o. literally tonnes of foreign money... If I remember well that company also originated from The Netherlands ;) Well,

All true Iain (y) And generally spoken a real pain in th a$$. But good news. We have been able to up-scale the YD9401 production. First we had to tackle the automated production. Which we did by

Hi there I have 24 detection modules DR4088LN CS - 4 of which are the Yamorc equivalent I have been aware of the max 10 on any Loconet from Iain Morrison- who has given me some great advice over

The YD9401 is one of many items in the YAMORC product range, and the one with a limited sales life because it can only be used with a DR5000 and the market is reducing with so many DR500 already

Reference your problem with the hornby point modules,? I didn't find a solution.? I have two on the layout that work and two that don't. I have sent these back to hornby after a month of discussion

I have seen many posts on here reference availability.? Obviously we know that the YD7001 is an excellent system which is why we are here. But does a business just not scale up production and it's

Karst I am confused by your comment below as I do not have any DR5088C units. ?That is Reded That is incorrect quoting ! ? I was referrring to you, mentioning that you had all DR5088RC !!! when I

Polling is the process where the computer or controlling device waits for an external device to check for its readiness or state, often with low-level hardware. Stationary Broadcast and Interrogate

With what Software do you monitor the reporting ? Greetz, Karst

There is no polling .... Neither in the DR5000, nor in the YD7001. LocoNet devices "just send" on input-change and/or power-up.

That is incorrect quoting ! ? I was referrring to you, mentioning that you had all DR5088RC !!! when I wrote that I never had seen the problem before.

Just for 3-rail deployment. Micro switches, reed contacts, IR-gates erc. Will just work ! Greets, Karst

Your remedy of multiple resets or limiting loconet connection effects the polling time. Chances are Digikeijs extending the polling time or number of polls to capture all the devices. Try powering