开云体育

Hello Andy Please you got it sorted, sorry it's crazy busy getting order out to everyone at the moment. Hope you are all well in your family. Stay safe. James [email protected]> wrote: -- Many

I am using 12VDC on the DR4018? for my N-Scale turnouts and they work just fine. Per Digikeijs manual: Maximum load per output is 2 amps, total output is 3 amps max. 12-18V DC *Recommendation min.

Easy to find inexpensive 120 VAC to 12 VDC 5A power supplies (price $11 to $20 US).? Conversely AC power supplies are more difficult find.? After alot of searching I found one that is 120VAC to 12

Lots of great comments, very much appreciated!? Yes, I will be using Atlas switch machines.? According to atlas, they recommend a 15 to 16 VAC supply that outputs 2 to 3 amps.? Most traditional

Brilliant, Dennis. Orrsum as you say in the U.S. Welcome everyone. -- Chris

The month of April we had a total of 18 new members. Dennis

The DR4018 only uses DC, If you connect an AC power source to the DR4018 it converts it to DC power. The "Preset 0" gives you a pulse output to activate the coils. Been using Atlas switch machines

Don’t worry, sorted it, had to wander about the house until it saw the dr5000 in the ssid search on the maus, all up and running now. cheers Andy

Hi, decided today to try and connect my wlanmaus to the dr5000, I have the dr5000 powered up but when I search for the ssid on the maus it’s not coming up, ?dr5000 is set to broadcast ssid so not

Careful, If you are using Altas switch machines they require AC power not DC.

Hello You say you are looking for a power supply for the dr4018. I have one question. What are you wanting to drive on the dr4018? If point motors what ones? Many Thanks James Hudson DCC Train

Thanks Iain, Chris, and Bill!? Very helpful!

I use these... https://www.digikeijs.us/dr60710-m-adjustable-dc-power-supply-with-eu-uk-and-us-cable-and-converter.html Bill

That power supply should work well. Another one which is very good and allows output voltage adjustment is the Digikeijs own version - available from DCCTrainAutomation:

The need to add (or subtract) 4 is only relevant when you are using Roco Z21 as your command station and not when you are using a DR5000 Iain Morrison 07767 456746 ________________________________

I'm looking for a power supply for the 4018.? Is a 12 V DC 5 A supply acceptable? I haven't yet purchased my DR5000 and 4018 but will soon.? I plan to use the Z21 app.? In preparation, I was

Brilliant! Sent from my iPad Pro

13 new Members have joined this forum in April. March = 9 February = 8 January = 18 I hope you all find this forum informative Dennis

Hi Doug. James who I spoke to . spent hour at least to him From Aust As he said to use the NCE for trains. And the DR5000 For points signals detection As long not to mix them together. It was through

Hi, I was an NCE user and still am on my exhibition layout (that may change soon). ?I had lots of conversations with James from DCC Automation about this, he said the same thing and he was right. ?I