开云体育

Hi, ? My earphones just work regardless on how the software switch is configured.? I’ve often wondered what it’s there for, to be honest. ? Karl

I bought this. Holds the radio and a short coax and my 20m efhw in the main pouch. MIc and earbuds in the secondary pouch and then a few other items. Condor Condor H2O Pouch (Bladder Not Included)

Interesting. I haven't had any issues and I've never actually toggled that switch. It just seems to activate when I plug in. Silly question, do those earbuds work in other devices?

Yes, everything works great with the xggcoms cable. The only thing that I had issues with was stray rf on the cable causing tx issues, a couple snap on ferrites fixed the problem.

Have you been able to use those setting with that cable? I've had no luck g

And the Xiegu mic is big and bulky, too! I hope to make an adapter from RJ-45 to 3.5mm TRS, but it's not a priority, and so far - no progress.? (I'm an FT8 user.) -- Doug, K8RFT

My TRS headset works.? I did not toggle S/P (I think).? As I recall, plugging in the headset switched off my speaker.? In fact, I just tested a tiny pair of earbuds yesterday, and it worked just

Thanks Doug, I appreciate the reply.? Bummer its not as easy as it should be.? My goal was to use a small baofang earpiece mic and modify it to just use the mic.? My main goal is SOTA so trying to

Hi all. I have an headset with a TRS 3.5 mm jack (indeed one TRS for earphone and one TRS for the microphone). Connected the earphone jack to the outlet on the rig (x5105 left panel, the outlet with a

Sorry Kevin for my late reply... thank you for your attention. I will try again. Have you any idea if this can be worked as a cw beacon? I could'nt find any option to repeat the msg... 73, gio

It makes it easier to find the info later, with a search, when it's all together. It seems that pretty much all "modern" microphones are the 'electret condenser' type, which require a DC bias

Hate to bring up an old thread but figure its better than starting a new one... Has anyone had any luck using a different mic or utilizing the PTT pinout?? Ive found a couple references where the G90

Following up on this, it looks like my messages are working just fine and just wasnt making it into RBN. I did notice that if i put some spaces before the first character in an attempt to give it a

Im glad you mentioned this.? I just recently purchased an X5105 and was testing some of the features.? I wanted to test CW and see if I could get picked up on RBN and did a formatted message, a sent

Sounds good Doug.? I'm at a loss of what could have caused the problem then.? Just a faulty part?? I don't believe it was the power supply problem as it's the same supply I've used for years and

The negative side (outside metal "tube") of the power plug connects to the radio ground.? I use an extra power plug on the radio end of a counterpoise wire.? The counterpoise wire is soldered to

done! for the community: the main trick is remove two lateral protection (those with the tilt brackets) (2x - 4x - 2x3mm screws (tool T6)) this will unveil other screws btw I had success in finding

I took off the heatsink first and just removed the screws in order that looked correct.? Just remember where the long and short screws go. -- 73 Tim KF7VUT

Thank you Tim. I'm much more confident now. I suppose to start removing the back panel, right? Gio.

Jorge, I don't know if there was a design change from the one I have but the negative side of the power plug could touch the side of the case before the plug was fully seated.? This was just my guess