开云体育

- So I disassembled the x5105 hoping that it was the battery or something simple that melted.? This is what I found.? It's toasted so make SURE that when you plug your charger/power supply into the

When you take an SWR reading with the internal SWR meter, it produces a graph with a marker at the lowest SWR point.? Is it possible to then move the marker along the graph???I’ve tried every

Here are: https://xiegu.eu/downloads/ César CD7CKU 73

Today I checked for the X5105 manual at Radioddity, and found no Xiegu manuals on their downloads page. -- Doug, K8RFT

I normally do transmit with the charger power ON, with no problems. *Earlier* versions of the Instruction Manual warned users not to transmit while charging.? The last (newest) manual, V3.0, does not

A few days ago I received an email from the official Xiegu store on Aliexpress offering the X6100 for just over US $ 600 at CL $ exchange, but sometimes I am a bit gross and leave the purchase for

Thank you for the clear sequence of operation. Gio.

Captain, I transmit and I have not had problems, I understand that what should NEVER be done is to connect the power with the X ... on. I have Menu Charger On. I connect the power with the X-- off /

Sorry to come back on a subject covered by other posts ... nevertheless I don't? want to burn my new x5105. Somewhere I read (mode or less) "... *do NOT transmit while charging*..." So, CAN I

done!

Very nice, Gio. I think that uploading a copy to the files section of the group could be helpful. /g/X5105-Users/files I placed a drawing for a TRRS cable I had built there back in

I had some problem with the subject. So here the schema that worked for me. Tested with FT8. I hope can be of some help to someone newbe like me. Please let me know if any mistake. Bye. Gio.

Hi all. I would like to thanks everyone who can help me in summarizing about the subject/topic I'm talking about of managing basic function like: --A-- reading and setting memories (-- vfo memory; --

thank you Dan, Heiko, and Doug.

thank you Doug. my problem is solved now I tried to install a prolific driver for an FTDI chip!!! When I (downloaded and) installed FTDI driver all went ok!!! 73 de gio

Hi all. I would like to send a recorded message via cw 1- I saved some text as MSG01 2- I set rtx mode as Cw 3- I tune let say 28.234.000 (in the 10 meters beacon band) 4- Using internal ATU I tune my

-IF- the chip in the cable is one of the "clone" (counterfeit)? FTDI chips, the new (current) FTDI driver that? Windows 10? installs won't work with it, and probably will disable the "clone"

The cable don't have a prolific chipset, it's a FTDI chipset. Maybe earlier XIEGU was using Profilic, but now it's an interface cable with FTDI chipset. That's important to know (the same cable was

Ok. Done. Thank you very much. Gio

The 3xx version only has those options in the service menu, in the FW .zip file there is a .txt in which the factory reset procedure is indicated: 1. After the firmware is updated, please hold press