开云体育

I have only successfully used the TinyTrak4 for digipeater purposes. The very informed and knowledgeable folks in this group told me how to do it. I'd have to go back and look at my settings, but I

The TT3 has no receive capability so cznnot be used as a DIGI.A DIGI will receive a packet, determine if there are path elements unused, then repeat tgat packet.Key element us receiving. On Sun, Mar

Hello, greetings to everyone in the group, if anyone knows how to configure the Tinytrak3 plus for digipeater I can't do it, any help I would appreciate it .... 73 '

I have used several.? The TT4 uses the LM335z in a TO92 package, I think.? Nice because tou can connect it remotely with 2 wires. It also has the ability to add a POT for calibration.? Best done at

Thanks to all who replied. I have a lot of research to do.? Rob, any suggestions re: external temperature sensors? Steve. W7SMC

The Micro-Trak products based on the TT3 also have built in temperature sensors. Most use the LM335Z, which can be removed and remotely placed, or through an auxiliary input. The RTG-FA is pretty

Both versions of the TT4 (built & kit) have a temperature sensor on the board.? However, these are likely inside the case and not a good indication of ambient. I'd suggest an external sensor

I believe the TinyTrak 4 (non-kit) has a temperature sensor on the board and could be used to transmit the temperature via APRS. Arnie, N1BAC (-9 when mobile) Sent: Monday, March 22, 2021 4:04 PM To:

Scott, Outstanding! Since the DTMF remote has seven logic level outputs, you should be able to do a lot of things.? Thanks,? Allen AF6OF

No you understood the question perfectly, My thought for being able to reset the radio was like you said used a 30-second time delay when commanded.? Then?just reset the tnc every now and again. The

Scott, That is a lot to unpack! I think you could get away with doing what you suggest, but it is very possible you will have distortion issues from wildly unpredictable?audio impedance mismatches,

I have a DTMF controller that replies to your commands to let you know if it did what you wanted it to do.... It has a ptt output and audio in and out. Would it be okay to splice the audio out for

I'm looking for a way to monitor the temperature inside my travel trailer that I could track via APRS on my HT.? Any ideas or has someone already figured the best way to do this?? I want to monitor

Hi I'm looking to set up a tt4 on a tower as a wide area digipeater. Does anyone have a list of recommended settings? Thanks

I guess "Big Social Media" has found yet another channel to block! 73, Allen [email protected]> wrote:

This one showed as a link and worked properly The last email did not. I wonder if it was blocked. Oh well.? Working now. Robert Giuliano KB8RCO

Hmmm, I just opened it from that very link. You can probably Google "Sams Technical Publishing" to find a link your browser will like better. Allen [email protected]> wrote:

I wasn't able to open the website? Robert Giuliano KB8RCO

I will be damned, they still exist!?https://www.samswebsite.com/ 73, Allen AF6OF

I remember those manuals with odd foldout schematic drawings.??I don't recall them called Photofacts though. I looked at the Heathkit stuff and some other old brand radios but didn't remember