开云体育

I don't know a thing about Fedors, but if your TT4BT and PC can connect, but there is no evidence of communication, I would verify that you have the Baud rates set correctly, i.e, both set to 19200,

BlueTooth under Linux is rather strange.Make sure you find the correct device.? The serial port connection usually has a designation of /dev/rfcomm#. You don't say what application you are running on

Hello everyone, I'm trying to send APRS messages using my PC connected to the TinyTrak4 which is connected to my FTM-100D radio. I set the Amode to TEXT and tried sending messages in APRS format but

Well, there are 3 basic things:1. Make sure you have the TT4 connected properly (comercial cables to data jack or personal made cables??? Those connectors aren't very common.? Use pins 1,2,3, and

Hi everyone: I have an MT 8000 FA available if anyone can make use of it. I didn't find any information about it at the Byonics web site, but I did find this link to the manual: www.oe3pdb.radio ?

I am interested in the MT 8000FA Contact direct at kb1chu@.... I'm good on QRZ Steve kb1chu

Hello all .......I have a manufacturer-built model of a Byonics TT4A that had previously been successfully used ONLY as a mobile unit, for vehicle position reporting/tracking, and am now trying to set

You're digipeater is working! See the attached Screenshot. John Emig W6GC 661-599-8689

THANK YOU, John!!! Looks like I must have been successful AFTER all!!! :-) Now I just need to tweak it a little bit for best efficiency. I sincerely appreciate the feedback. Dave S. of

I'm new to using the "groups" forums, so please bear with me if the info is already available somewhere on the groups network.? I don't know how to find things just yet. My question:? I just

Since you already have the TT4 working as a DIGI, there are only a few settings to worry about to connect to the computer.First, almost all APRS computer applications ecpect the TNC to be in KISS

Dave, Would you be amenable to speaking with someone on the phone about your questions? Sometimes people with the answers, when faced with having to do a lot of typing, would rather have a real

That would be awesome! bearskinrugmaker@... Dave Sent: Saturday, January 18, 2020 5:29 PM To: [email protected] Subject: Re: [TinyTrak] How DO You Set Up a Byonics TT4A as an

To configure the stationary TT4 as a digipeater, Connect the TT USB cable to the computer and install drivers if needed Run a terminal program such as TeraTerm Pro and set it for 19200 baud Connect

Also check YouTube, as someone could have made up a video about it. Youtube is one of my ports of call before putting a question up. I learnt how to prog DMR radios via YouTube. Regards, Doug

Byon, Thanks for the info.. I already got the TT4A successfully up & running as a Digipeater a couple days ago. I don't HAVE a TT4A USB interface cable. I'm using a Null Modem cable to

Very informative, thanks Byron. Will these instructions work for the TT3 as well? ?73, Don ?W4GCW

Sorry for the bad info.The APRSIS32 app does require XP or newer. On Mon, Jan 20, 2020 at 0:56, Dave / KL7BX<bearskinrugmaker@...> wrote: <!--#yiv5714237341 _filtered {} _filtered

TT3 can't digi.? It doesn't decode? On Mon, Jan 20, 2020 at 9:30, Gurdon Wolfe via Groups.Io<w4gcw@...> wrote: Very informative, thanks Byron. Will these instructions work for