开云体育

I presume you mean the illuminated push switches on the various plug-ins? If so then I'm afraid the answer is nowhere on the 3-slot chassis! I believe the reason was a shortage of power in the

I have no lights but I know they work. Im assuming because p10 is empty. I have looked at the schematic for hours but I cant figure out where the input to p10 comes from.

Tested another U950, from a working scope of a friend, both U950 work on his scope, both doesm't work on mine. It seems like grid bias is not clamping the ac waveform at the correct amplitude. If I

Hi Fabio, I have one of these, but it originally came with two 7A18 dual-trace vertical amp plug-ins. I think this, together with the 7B53A, was pretty much the standard complement for the 7623A

Right place is the hp_agilent_equipment on Yahoo! Dave

This will be my last post on this thread. You should do the same, so ppl here can get back to Tek(tronix). Your post on the CC list says nothing about looking for a CD/ROM drive that is 512 byte block

Pete, I'm sorry. I have joined them but I am waiting for Admin approval. Please don't yell at me. It wasn't necessary. I just misunderstood and made a honest mistake. Again I am sorry. Everyone else

RICH !!!! YOU ARE ASKING ON THE WRONG LIST, THIS IS TEK SCOPES NOT HP !!!!!! I GAVE YOU THE LIST TO ASK ON wrote:

Hello all, . . . . For those of you who having not been following my trials and tribulations with a 16700A in another topic here is a partial update. I received this LA from a benefactor who has

Pete, OK! :(:( I will do that. I got my Unix for Dummies Book out so that I re-familiarize myself with the various commands. Can I really mess it up any worst than it is? Yes, like I said I have been

Until you get a CD drive that is supported buy the Unix disk driver (thats why it is looking for disk blocks, it knows nothing about cd blocks) there is nothing I can do, I suggest putting the LA on

I'm sure they had a supplier issue a bad batch of either sprayers or nozzle tubes then. It definitely happens from time to time in manufacturing. I wonder if the MG tubes would fit another brand of

Dave, I found it. I then burnt a CD and I found the steps to recover the system in this document: https://www.keysight.com/upload/cmc_upload/All/16700710.pdf but my CD-ROM drive won't work. I am

On any machine, if there are tantalums to be replaced, I always use film capacitors of the same value. My preferred choice is Wima MKS2, which are similar in size and profile to an electrolytic, so

If anybody needs that image, they can get it here: https://archive.org/details/B37601424316700A.02.90.00 Paul

And thank you, Kurt! Here's the link: http://w140.com/tekwiki/wiki/U-Tech_681 Sebastian Garcia wrote:

David, Yep! It is you. Sorry about the mix up on the name. I found a whole page of files for the 16700 machine. The B3920-13640 is listed as for the server and B3782-10101 is listed for the

Correction the Ignite CD (HP image CD isn't B3782-10496, it is B3760-14243)) If you need an iso of that reinstall boot CD for the 16700 series (16700_A0290.iso) I have a good one, but don't have the

I think that could be me! Are you referring to < http://perdrix.co.uk/hp16700/index.htm>? if so the good one was on the HP_UX 10.20 install CD part number B3920-13640, not the HP image CD

Pete, Not a bad idea. It will have to wait for another time. Money is short. I appreciate the information! GOD Bless and Thanks, rich!