开云体育

Thanks for the information, I agree with both of your assessments. It was easy to find the Cables in a flex format so I went out and bought some on day one. Now that I read your posts I know it won't

Hi Jim Thank you so much for clearing that up, I looked at 11-33 and it seems fairly easy to use my Dremel and a drill to modify the VR plate to the TG plate :) I also downloaded the firmware files

I wonder me ..What is the stuff in both ultrasonic transducer surface?. Since this levitation occur due standing wave which create nodes of high pressure followed by valley of low pressure where the

That narrows the problem down to some point at or after transistor array U460. The good news is that the 2213 does not use a custom trigger IC so if the problem can be found, it should be relatively

Kurt, ? That is a great bit of work - Thank You. ? Kind regards, DBN

Hi David, still out there? back from trip... I checked tp444: with trig on "line" i have a sinus with about 0.5V tt if i connect a 4V top-top sinus at ch1 with trig on "int" i have 150mV sinus on

"Now if only I could get the readout to reflect a 100x probe when doing tube work!" Is the 5000 series readout system different than the 7000? On the 7000 series all you need to do is have 6.2K +- 5%

Hello, I am attempting to put together an complete index of Tek Catalogs fromt the beginning to 2000, linked to PDF downloads. I have not been able to find scans of the catalogs for the following

Hi Herbert, Yes, Firefox/Linux, but several other members could download the file also, see earlier responses. Albert

There was a known issue with some TDS scopes caused by poor solder on the metal shield on the ceramic attenuator boards. The legs on that shield provide the ground return for the relays. So a bad

Hi Albert, so far, so good. But it does not show the CA???ZCHA fieled but only the "continoe" button ;-((( Using FIREFOX ?! Herbert Am 22.09.2012 20:59, schrieb Albert:

Hi Herbert, Click "request download ticket" at the bottom of the first page. Then type the CAPTCHA field and "continu". And so on. No login required, but this "free" service will certainly try to

Hello-- The original inquirer decided that the C1001 I'm offering free for postage (plus a sop to cover PayPal and shipping supplies) wouldn't meet his needs, so it's now available. This is a

Hi, was someone able to get that file from filecloud ? It wants a answer, but does not ask a question ??? Herbert Am 22.09.2012 18:50, schrieb Albert:

Hi Dave, Thanks for forcing me to look further in the manual. You are right, the procedure is shown at pages 6-25/25 and it works. Never too old to learn something! Still I don't understand page 5-1:

thanks for your kind reply H?kan, I thought wrongly that the reason for the error generated by the FAS was caused by the fact that the instrument was in "Running". The "Error string not set" happens

Sorry to revive and old thread. If you decided to use the supplies in a different chassis and wanted to part with a front face frame, I'm looking for one as my beat-up 5111 has a broken frame. thanks.

Your 2247A success made me think about what could we learn from your adventures. If you simplify the problem, you have a 2.5 volt supply going through three things in series, R101, R105 and whatever

So the 1410 is an NTSC signal generator, but I've plugged back in the multiburst boards, and it turns out that they are a general purpose sweep oscillator (output on P6 card output at the back array