开云体育

I'm also relatively old (my daughter says the same thing about herself), I use Tekwiki all the time and have contributed a number of documents. We should try and find two people of age 50 at most. I

I'd volunteer as a backup person. I've had admin privleges for awhile and have contributed manual scans to the site. But I'm relatively old; it would be useful to have at least two younger people on

Hi all. Looks like the HV transformer in my SC502 oscilloscope has decided to die... Does anyone have one of these they can sell to me and send to Japan? The one in my unit has part number

Earlier today, I sent Kurt a PM asking if he was well and if so, does he have a back-up person or procedure in case he "won't be available", since so many of us depend on Tekwiki. Also, I suggested we

Yes, thank you as well from me. I reference it a LOT and I appreciate what has been done for it. BOTs : Technology at its worst... Thanks, Barry - N4BUQ

YES! Thank you! ai bots are a real problem. Frank DuVal

Thank you for creating, updating and maintaining this site. I use it all the time!

Hi, Tekwiki is being overloaded by bots that attempt to download the entire website. The result is bad service for human users of the site. I expect the performance of the website to remain bad until

The manual of my EICO 232 vtvm indicates that it can measure up to 30kVDC, but with a special high voltage probe, otherwise it's up to 1500V only. Rafael

Kurt Rosenfeld last I knew. I have a login since I contributed before and am able to get in, however it is extremely slow.

Mark, Also, it is possible the still gold stiff pins need added solder to the boards. A bit of solder on each side. Mark

Mark, The s/n I meant is for the 7B92As. The page <3> is for the plugin. Mark

I was able to get the copy of the manual I needed from the Wayback Machine. I recommend others to use this as a temporary solution until this gets sorted out. Radu. [email protected]> wrote:

Mark Thanks for the reply The one I have is serial #B141271 It’s the R7844 I have another 7844 serial B142533 with exactly the same problem but on both beams, The one with out this problem is

I don't recall who owns the domain and maintains the storage etc... To look a bit closer into it. Can anyone please remind me? I see a "Proxy Protection LLC" on whois, but that doesn't tell me

hey folks I plan to open up my Tek T922 scope in the next couple days to hit all the contacts with contact cleaner & reseat the boards & connectors . It looks like 3 screws on top spine & another 3

It looks like there isn't a page for the 1424 at TekWiki. Are you up for creating one? There are paper manuals on eBay. -Thomas

Back to the Log In Required mode, evidently. Jim Ford Laguna Hills, California, USA

Hi Morris: Thank you for the tips. Finally got my hands on a VTVM, but alas, the highest range is only 1500V. Checked some voltages and they're definitely wonky. Going to re-cap as much as I can to

Mark, The s/n of the piece will make a difference. If below 60000, it is likely the tunnel diodes on page <3> are bad. I have had this problem before. These going bad will cause your problem from