开云体育

I have been a fairly quiet member here for a few years. Electronics has been a hobby my entire life and has been joined at the hip with my business for 33 years. Unfortunately I must close my business

Hi Mike, I don't see your direct email address so I can't respond off list. Qservice web page is: https://www.qservice.tv/ I'm a satisfied customer. Regards, Ignacio -- Este correo

I am looking for a seller from Greece who i THINK was named Qservice however no luck on Fleapay search, any help is appreciated. If a seller in the USA has the same avaiability of parts, please let me

hipping 577/576 is always risky, sellers seldom have the correct box thickness stregnth or packing materials. Most arrive with broken or internal damaged CRT. Take photos and keep packaging, sned

Interesting that this probe to BNC adaptor is not yet listed on TekWiki. The picture looked a lot like one of the standard #6-32 probe to BNC adaptors (013-0054-00) of which there are two sitting on

I'd choose my own selection over some other random internet person every time. Too many self proclaimed experts appear on a whole range of subjects, then many sheep start to follow and believe.

Hi Michael Could you tell me which pot you are refering to? I also have the problem of the horizontal size of the sweep not going fully to the left. thanks

This is correct. The adapter might be used for other P51xx series probes? but I have a few P5102 probes for my THS700 series scopes and would like to get everything all adjusted and straightened

Jim, This is not your “typical” probe to BNC adapter. It is used for the P5102 (1kV), which I presume is what Jared has. I don’t know where else it might be used. For those who have not seen it,

5mm to BNC? These are from tek, built by Amphenol: https://www.ebay.com/itm/264270047301 JimMc

Get a refund. Top dollar for a 577 with no CRT is a show stopper. Glydeck. KD6NEW

It helps to reference a little of the previous email's content cut and pasted into your email so we know what it's about...

Alex, Where are you located? I may have one. I’m in the Los Angeles area. George KD6NEW

Sorry, I forgot to add - I'm in Florida. I'd be willing to drive several hours to pick one up, or pay for shipping.

Good tips, thanks. I'll look into my ebay resolution options further. I have sent a message to the seller via ebay with a picture.

"No glass" means literally that - the glass vacuum envelope is gone. You can see the broken off shards at the base of the CRT. And because the broken glass is not in the shipping box or the 577

On both of my 7854's the SQR light is lit whenever I turn them on unless it BPIB cable is connected and live. Disable the GPIB interface (Switch 1 to 0) to turn off the light? Mark W7HPW Real Radios

Hi all, I'm currently searching for a 013-0291-02 (or -00, -01 etc if they exist) probe to BNC adapter that isn't going to cost me a left kidney and first-born son... It looks like

=== I am sure there are others too but Agilent U1272A and HP3466A are two examples with AC only or AC+DC options. Ozan

The CRTs come from 5xxx scopes, right? If not in a rush, that could be inexpensive. With ebay, and a seller that sends out broken when advertised as "used", you are likely to be able to get all the