¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Plug for 7CT1N captive lead?


 

There appears to be two variants of this captive lead. The picture in my manual shows an in-line white plastic "plug", as does Tekwiki. It is given as p/n 195-0095-00 "Lead, test: BNC" and the manual also lists p/n 348-0301-00 "grommet: plastic, 0.312 ID x 0.43 inch OD" associated with the lead. However, my 7CT1N has a black lead with a double-ended connector forming a tee with the lead. One end mates with a BNC male, the other with a BNC female, but still only one connection, no shield. I might add that I purchased the 7CT1N from Dennis Tillman about a year ago.

Colin.

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of EJP
Sent: 25 August 2019 07:21
To: [email protected]
Subject: [TekScopes] Plug for 7CT1N captive lead?

The plug has finally broken off the captive lead on my 7CT1N, the one that goes out to a vertical amp or time-base depending on which side you have it installed. I'm sure I'm not the first victim of this. I can obviously replace it with an ordinary BNC plug, and am doing so temporarily (I hope), but it rattles around etc., and it also has a redundant earth connection. I'm wondering if there is something more suitable, short of the unobtainium (I presume) entire 195-0095-00 assembly, that is maybe made of plastic and/or only has the inner connecting ring.

Thanks in advance

EJP

Join [email protected] to automatically receive all group messages.