开云体育

Hi Tom You're welcome, it's all fun. -- Cheers Clark and Skipper Our blog Small Boat Restoration ( http://smallboatrestoration.blogspot.com/ ) Our book The Sunfish Owners Manual (

Ballpark $75.00. Patterson Marine Pentwater Michigan

Last I checked Melges was offering free shipping on all Harken hardware. They also had good prices. Rick

Hi Dennis, I've been using Harken ratchets on Sunfish and Lasers for decades. Definitely an option that you can't miss with. They have a new model out that is supposed to grip a little better that

Dennis, I installed a Harken 2135 57mm Manual Ratchet Carbo Block, Harken Stand up Spring for Dinghy Main Sheet Blocks, and Harken Harken Spring Cup. This is 3 items from Intensity Sales. It cost me

Hi Dennis, Last summer, I installed a Harken 57mm ratchet block, and use a boot spring to keep the block upright. https://www.harken.com/productdetail.aspx?id=4744&taxid=420

Dennis, I'm watching this thread. I just removed a ratchamatic from my newish Sunfish because I could not figure out how to use it. Now I see they are quite spendy so it must be something I need to

Clark, I just noticed the link to your Owners Manual book. Ordered it from Amazon, will get it later this week. I'm gonna need to learn how to dry out my waterlogged Sunfish. Thanks for all you

Good morning. I have a sunfish that only has a hook. I want to upgrade it. I see Harken has a ratchamatic. Has anyone used this model. I tried to call a couple of places yesterday (Including

Depends on whether you have the pop rivets or rivet nuts with machine screws. Pop rivets drilled out with a 1/4 inch steel bit. Machine screws as mark mentioned. -- Cheers Clark and Skipper Our blog

-- Cheers Clark and Skipper Our blog Small Boat Restoration ( http://smallboatrestoration.blogspot.com/ ) Our book The Sunfish Owners Manual (

It's a 1972 or 74 with an a metal bailer that used to have a brass screw-in plug in the footwell. ?I'm finding there is no standard plastic plumbing connectors at my hardware store that fit the

No password, can't see it On Thursday, August 20, 2020, 8:43:01 PM CDT, Keith Judson <judkei@...> wrote: If you are talking about the old style bailer, go to this link for dimensions:

It gives some info in the note to the right of the diagram of the bailer

I found this https://bk410.com/boats/sunfish_bailers.pdf <https://bk410.com/boats/sunfish_bailers.pdf>

If you are talking about the old style bailer, go to this link for dimensions: htt/g/SunfishSailor/files/SUNFISH/Parts/Old%20Style%20Bailer.pdf (

Brian, thanks for that follow up..must have come in late on this one..lol [email protected]> wrote:

I think what he is asking for is on an old metal bailer what the diameter is of the cap. Since it is different than the newer plastic ones. Dealers aren’t the issue laser performance is the issue

Hi Mark, What year is your SF ? The difference is mainly in the length of the center threaded part that comes up from the hulls bottom. The two sizes have to do with the thickness between the outer

Yeah, that's not efficient. ?I did that tonight, bought 4 pieces that I thought might work, added up to an hour's time and almost twenty bucks and only the $1.19 rubber cork worked. But I want