开云体育

No VAT, at least. If it's shipped to the US no sales tax, and duties are pretty reasonable, too.

James, I guess I assumed it would be far more expensive with overseas shipping and the exchange rate. Maybe not? -- Scotty

Why not just get the full RJES package? Motor mount, plumbing etc? That's what I did and went perfectly no issues. I used the header from RMW

Hey Scotty. Im sure you’ll get some valuable feedback regarding compatibility of parts here. Quick piece of advice….put together your component listing and give RMW a ring to check their knowledge

For those who know stuff, I bought a 2006 Impreza yesterday and drove it 3 hours home to East Tennessee. ?2.5 SOHC seems to run great but we’re gonna go through it before putting it in the van

Gowesty makes a clever little 3D-printed holder for the Scan Gauge that clips on the dashboard and positions the gauge right below the instrument cluster. $16 USD, I believe. Works well for me.

Hey guys, thanks a lot for all of the response. I’ll go with the standard VW sender, connected to the dash gauge. On top, I bought the Scangauge 2 OBD2 device to either install somewhere in front of

RMW is the best!? They replaced a frozen radiator fan when I was on a roadtrip; on an 85, those things were hard to come by....but they had a used one.? They let me use their A/C comfortable office

All,? I thought I'd post what was finally discovered.? There was a wiring issue in the main harness.? While I was able to isolate it to the harness as described above, I thought I'd visit with the

Hello,? On both of the ej22 conversions that I have done, I have simply used a series resistor with the subie sender. You can try various values to get a reading around middle range on the gauge when

If you're going to go new short block which I highly recommend after my experiences get a hold of me. on a road trip I ended up buying one in Oregon no sales tax so that was fun and got a litttle deal

Thanks for the response! I spoke with him this morning. He said he’d be willing to halve his labor cost and give me a deal on parts which I definitely appreciate. He is definitely trying to do the

Well, I have an EJ22 installed per KEP kit, by California Westys in El Cajon, CA.? They get all their motors from Steve Johnson in Alpine.? CA Westys has now done many hundreds; I was #53 about 7

California is crazy. Eric Freudenthal sent from my mobile >

You can get hour meters at the local marine store . What state are you in . in California Im not sure they would be OK with an aftermarket odometer . had to rebuild one for my MG . Sent: Sunday, May

Lots of good advice and options above. FWIW, we have an OBD2 Scan Gauge mounted in a clever little 3D-printed holder from GoWesty that clips on the dashboard above the steering column. We also added a

Rather than fussing too much with incompatible signals, I instead discarded my vw instrument cluster and instead screwed down a thin piece of plywood in its place and installed modern 50mm round

Not sure yet. I was initially thinking head gasket but it’s beginning to appear to be more catastrophic than that. I haven’t pulled it apart yet, and it didn’t overheat. I drained the oil pan

Hi Jake, thanks for advice. I will follow your suggestion. I’ll report how it will be working while done. cheers, Maciek

That’s unnerving since I didn’t install for 6 months after picking mine up .. I’m at only 2k miles so far. do you know what failed ? . I spent time at his shop . His off-road credentials are