|
Re: Beta Testers
1987 Vanagon Syncro, converted in 2000. Normally aspirated 2.5 with gen1 interface board. Willing to move to an upgrade via beta testing. Phoenix AZ. Drive all over the southwest in elevation and at sea level. ? --? Sean G
On Wednesday, January 25, 2023 at 08:02:17 PM MST, TTT <austin@...> wrote:
Beta Tester: We are going to take beta testers for a new interface board and we want to test backwards compatibility with the older systems.? The first production batch will be back in a few weeks and we will select some specific candidate motor combinations to test out.? If you responded yes to testing—it isn’t a guarantee you will be a tester.? Geography will be a factor… ? Austin Nichols Owner/Engineer (253) 473-2474
View our terms and conditions
? From: [email protected] <[email protected]>
On Behalf Of TTT via groups.io
Sent: Saturday, January 14, 2023 5:12 PM To: [email protected] Subject: Re: [SubaruVanagon] Beta Testers ? Yup—a few people have responded. ?I need to test a few things on rigs we don’t build. ? ? I am keeping a tally right now if interested parties. ?I will be sending out details in coming weeks for what we are looking to test, ? Austin ? Get From:
[email protected] <[email protected]> on behalf of Eric M via groups.io <ericmedrano@...> ? Still looking for testers? Im not located in washington I live in Eugene, OR - have a westy w 2.2 and westy w a 2.5.? |
|
Re: Beta Testers
Hi Austin, Coincidentally, my SC Interface board seems to be not working. It is, probably, 8 years since I installed my SC Kit. It's a 2007 2.5 with VW Auto. I'm ready if chosen !! :o) Thanks, John C... On Wed, Jan 25, 2023 at 7:02 PM TTT <austin@...> wrote:
|
|
Re: Beta Testers
If you're still looking I'm in Ft. Myers, FL with a 2.5 and the conversion bits bought from you.
Al Pfeiffer
-----Original Message-----
From: TTT <austin@...> To: [email protected] <[email protected]> Sent: Wed, Jan 25, 2023 10:02 pm Subject: Re: [SubaruVanagon] Beta Testers Beta Tester:
?
We are going to take beta testers for a new interface board and we want to test backwards compatibility with the older systems.? The first production batch will be back in a few weeks and we will select some specific candidate motor combinations
to test out.?
?
If you responded yes to testing—it isn’t a guarantee you will be a tester.? Geography will be a factor…
?
Austin Nichols
Owner/Engineer
(253) 473-2474
View our terms and conditions
?
From: [email protected] <[email protected]>
On Behalf Of TTT via groups.io
Sent: Saturday, January 14, 2023 5:12 PM To: [email protected] Subject: Re: [SubaruVanagon] Beta Testers ?
Yup—a few people have responded. ?I need to test a few things on rigs we don’t build. ?
?
I am keeping a tally right now if interested parties. ?I will be sending out details in coming weeks for what we are looking to test,
?
Austin
?
Get
From:
[email protected] <[email protected]> on behalf of Eric M via groups.io <ericmedrano@...>
Sent: Saturday, January 14, 2023 5:08:55 PM To: [email protected] <[email protected]> Subject: Re: [SubaruVanagon] Beta Testers ?
Still looking for testers? Im not located in washington I live in Eugene, OR - have a westy w 2.2 and westy w a 2.5.?
|
|
Re: Beta Testers
开云体育Beta Tester: ? We are going to take beta testers for a new interface board and we want to test backwards compatibility with the older systems.? The first production batch will be back in a few weeks and we will select some specific candidate motor combinations to test out.? ? If you responded yes to testing—it isn’t a guarantee you will be a tester.? Geography will be a factor… ? Austin Nichols Owner/Engineer (253) 473-2474
View our terms and conditions
? From: [email protected] <[email protected]>
On Behalf Of TTT via groups.io
Sent: Saturday, January 14, 2023 5:12 PM To: [email protected] Subject: Re: [SubaruVanagon] Beta Testers ? Yup—a few people have responded. ?I need to test a few things on rigs we don’t build. ? ? I am keeping a tally right now if interested parties. ?I will be sending out details in coming weeks for what we are looking to test, ? Austin ? Get From:
[email protected] <[email protected]> on behalf of Eric M via groups.io <ericmedrano@...> ? Still looking for testers? Im not located in washington I live in Eugene, OR - have a westy w 2.2 and westy w a 2.5.? |
|
Re: evoscan works .. partially
Hmmm . well still hoping to hear from someone an active member who had success, the EvoScan "support " doesn't seem to be responsive to our application (its a facebook chat).?
I found a site from an interesting guy (helped build the burning man temples ! (?.) looks like he has had both OBD-I & II EJ 22s and collected data from other users. So it can be done . Both of you , If you want to add some details re cables & connectors we might figure it out . I will say it helped a lot to get the B10 Scantool to work just to get the ROM number and be confident the connections work . Plus those Binary parameters are really nice to have . I used an old Sony Vaio with the 25 pin printer port that a friend set up to open to DOS.? Jason, I immediately uploaded the 3.0 upgrade (free) and I have found I am able to change the units but i haven't tried moved or relabel fields.? Best? ?m? |
|
evoscan works .. partially
Hi Again .
I'm using the evoscan 3.0 to fine tune a rebuilt 1994 (OBD1) 2.2 legacy AT NA in my VW syncro. I finally got things hooked up and running . I captured some data . However .
Be aware . the software come with virtually no info and you have to join facebook to? ask questions . Understandably mot folks are not interested in OBD1 applications so im hoping someone here has some experience to share .? 2 things to know . Your purchase receipt has a code you need to activate the software and I had to get the USB driver from the TTL232 cable manufacturer here?https://ftdichip.com/drivers/d2xx-drivers/ I can see a fault code from the black blug diagnostics connector blinky lights on the dashboard (#24) but doesn't come up using the read DTC function in the software ... Q- do i need to connect the black read connectors to read the codes via the software ? will it work with power only or needs engine running. Also there are 2 sets of 8 binary parameters Binary parameters that should be available :
Q- Is evoScan able to display these values ? |
|
Re: alternator upgrade question 3 pin to 2 pin
Thanks Brent, I think I've referred to your website since my first conversion 15 yrs ago (cutting out the poptop to install a decent skylight if I recall).
I solved the problem and it was a simple as it gets . I had a pile of skid plate .bumper & undercarriage parts powder coated and I threw in a few engine brackets etc. while i was at it . i tested ground continuity between the alternator & bracket and it was fine but after systematically testing i found the bracket to the block was completely isolated .. rather than bull the bracket I added a dedicated ground wire. I can confirm the >14V output @ 2k RPM . I connected White "S" connector directly to the B+ post . I have seen Web knowledge that it may be better to get that feedback directly from the +ve? post on the battery and ill be checking that today.?? While I'm confessing to rookie moves ill share a a tip . Test your coolant setup before bolting on the intake manifold ... I sourced some non OEM bolts for the water manifold and spotted significant coolant weeping onto the block after assembling everything. Turns out the bolts were bottoming out and when i torqued them to spec they didn't compress the new O rings. That one took forever to figure out? (thankfully its required only low torque) .Those 4 long bolts were off by 2-3 mm.? |
|
Re: Idle fluctuation on a Frankenmotor OBD1
You just spray carb cleaner into it and/ or let it soak and use q-tips to clean the interior it as much?as possible. ?? On Sat, Jan 14, 2023 at 23:08 Robert F. Chhaing-Carleton (Douglas) <mindeyed@...> wrote: Hi Wayne, How did you clean it? |
John C...
Dr Mark
Leo
James Archibald