开云体育

Thanks guys!

Adding an oil cooler would add the extra capacity I'm looking for and is
probably where I'll end up. I looked up the Wix 51381 and it is usefully
bigger. While hunting that filter I came across the thread pitch and gasket
size for the Wix Subie filter, so I'm armed and dangerous!

Seeya, Jake

On Thu, Apr 12, 2012 at 3:41 PM, OlRivrRat<olrivrrat@...> wrote:

Hey Jake

I run the Fram ThoughGuard TG3593A on my VDubarus 2001 EJ25 because of the
size diff'

Subi OEM 2.625"D x 2.375"H = 12.8533CubicIns = 0.4451Pints

Fram TG3593A 3.000"D x 3.000"H = 21.2058CubicIns = 0.7344Pints

Keep in mind that there are some gutts to a filter that use up some of
that available vol'

Also, my EJ25 is mounted on a 2009Vintage SmallCar Mount& there is no
"fit" issue

ORR ~ DeanB


--- In subaruvanagon@..., Jake de Villiers<subyjake@...>
wrote:

Hey Richard, I'd imagine there's about a cup of oil or less in the OEM
Subaru oil filter, 8 ounces up here. Its a bit of an issue for me, in

that

I think a little more capacity would really help oil temps.

Does anybody know of a bigger filter that fits the 2.5 Subaru engine?

Thanks, Jake

On Thu, Apr 12, 2012 at 10:30 AM, Richard A Jones<jones@...>wrote:

Trick question?
The oil level will go down by the amount of oil that remains in your
engine block and heads plus the amount of oil that remains in your

oil

filter. The level will go up as the oil returns from those areas to
the oil drip pan.

Not trick. Maybe dumb. Larry suggests about 1/2 qt and Rob say
you have to check every car.

The oil in the block and heads doesn't count, since it is there
when you drain the oil. It is just the amount that goes into the
new filter that I'm curious about. The filter is pretty small.

Guess I'll measure and see.

Thanks,
Richard

--
Jake
------------------------------------------
Crescent Beach, BC
-----------------------------------------------------
1984 GL 1.9 WBX
1986 Westy Weekender/2000 2.5 SOHC
with 5 speed transaxle& PosiTrac Differential