开云体育

Bruce wrote: Bruce, it should be in the manual. Look for the Audio socket connections diagram. F is earpiece A microphone C PTT switch D common return for all those I did buy some handsets from

Anyone have a schematic for the handset for the TRA 931 set? The number on mine is 5965-99-901-4616. I think mine is wired wrong. Thanks. 73, WD9GHK

hi has anyone any ifo on the tra 3910 cheers stan

Thanks for the feedback. I guess I will stick with the SG237 seeing that I have one already. The rig will be going into my S2A ex-army landrover when I have finished renovating it. I will also have a

Many thanks for the info there Iain, really appreciated, I think I'll risk an M then & see how it sounds, I had heard they had a "bid" socket, but what that actually was & what practical use it could

Gavin I think there are both practical and interets/rarity reasons for preferring the 351-M. The practical reason is that the modified sets have wider audio bandwidth through the BID 300 socket -

Which would you say was more sought after, the standard Clansman 351, or the modified 351M? I have the chance for either, same price, I just can't decide which to choose so I thought I'd ask you fine

For disposal Codan 2110 HF manpack, with Softpack, batt's and ancill's almost mint Any interest talk to your bank, then e mail me Stuart G0TBI

Hi Howard, At first I also used an SG237 with the BCC39B/Vehicle 100 Watt adapter. All worked well using a SGC smartlock. I used an AT1011 whip antenna on top of Pinzgauer 4x4. Now, to keep

Xtal time again HC6/U needed For hf manpack: I am again looking for xtals, this time hc6/u and frequencies needed: for 80Mtrs, fc plus 1.4MHz so anywhere between 4900 khz and 5200

I just bought a BCC589B Vehicle Interface Unit to go with my BCC39B and have two questions: 1. What ATU, if any, was used with this unit? I intend using an SG237 but am curious about the original

I think you will find that it is used with the Syncal 30. Howard VK4BS mb302480 wrote:

Group a friend of mine has a very nice prc2000 for sale if interested you can contact him off list at chas.g1rsk@.... Jeff G8XXI.

. i hope you recoup what yopu paid for it but $200.00 plus shipping is just out of my ball park im a disabled guy(6 bypasses and a stroke) so obviously im a bit limited..im going to make one -sort

Hi all, I have a BCC-540 ATU. It is a plain 540, no suffix ! I opened it and saw that the control socket has only three wires connected Black, Red, Orange. Is this ATU compatible to BCC-39B ? Is it

There was a recent post concerning the subject amplifier that seemed to imply that it was not suitable for operation on 24 Volts, if I understood the post correctly. This is not the case. These are

Hi Bob Yes I thought as much, someone said you could also use the MA 540B ATU, I have never owned the earlier ATU, but have seen pic's of it on the web. I may try it out soon, using a 540B or just

apologies if off topic Group I have listed the following on E Bay _http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140416692059_

MA 988 loudspeaker for sell please reply directly with email. the speaker cost me 40.00 to get to the USA and 200.00 to buy after looking for 2 years for it years ago if you know where I can get more

________________________________ To: Racal-manpacks@... Sent: Fri, June 11, 2010 8:16:39 AM Subject: Re: [Racal-manpacks] MA 988 loudspeaker for sell please reply directly with