开云体育

Spike, Hi! Can you manage a picture or two, so we know what we are actually looking for? Thanks Mike b

I have an original antenna for mine, also the goosneck base. But it has no markings at all. I'd like to get another. Dennis Starks Military-Radio-Guy KB0SFP Monitor(all USB): 3996, 5403.5, 7296,

Well in realaity, I think we all do! The Larkspur a40/A41 flexible thing does fit and therefore the whip that goes with it fits the flexible, so there is an alternative available. Mike B

I need information on a source for stock whips or whips that are compatible with the TRA931x. Any info will be helpful. Thank you. Justin

Yeah, missed out on first one, got the second on a second chance offer but should have bought the third at half price! Never mind, I have had the BCC39B for at least seven years, probably longer, and

Stuart The PSU and Amp (I assume both are in it) that has switches for HP and Boost plus connections for Audio, Harness and ATU. Howard

I have finally acquired a vehicle mount for my BCC39B and am looking for either a handbook or information on the various switch settings. Hopefully, Howard VK4BS

Hi Group, I'm looking for a pack for a PRM 4790 Syncal 2000 unit. Any idea if that unit's chassis is compatible with packs from other systems, or am I going to be stuck with finding a soft bag that

Very Good Was that one I saw on e pay, and I take it it's working, all you have to do now is find a way of attaching to vehicle, the rails or runners as some call them, I could never find, I

Howard When you say vehicle mount, do you mean the VIU (PSU and Amp) or rails that the 39 sits or attaches to? Stuart G0TBI

Yes, I saw the schematic in the manual but was looking for the diagram for inside the handset, switch etc. I rewired mine so that I can get it to ptt but no modulation. Must be more to it than

Group looking for any info on the above item. operating manual,service manual,connecting cables? cheers Jeff G8XXI.

Group Charging TRA 967 cassette pack, through the audio plug with use of the MA 945S??? Any info, I cant find my manual, that's two on the missing list! Cheers Stuart G0TBI Operating from

Hi Folks, I have a 351 with a broken frequency selector thumbwheel cracked, does anyone have a spare? And can anyone tell me how to correctly remove/replace it as I don't want to damage it? Many

RACAL "MA 1720", an exciter 1.000 to 29.999 MHz; Would anyone have the manual, circuit etc for this ? thanks, Ben G4BXD.

I'd go with that: from memory, the initialisation process for the 3910 was much the same as the 3900, and most of the various fault codes that crop up will normally clear if you press enter: even

If the initialisation procedure is similar to the 3900 VHF set, another group member helped me get on the right track.... Turn COMSEC switch to INIT, and power-on the set. After a bit INIT DONE

I know this has been mooted before but has anyone made an adaptor lead between the 931 anhd the Clansman series? Are the insert impedances and keying schemes interoperable?

Bruce, I should have looked in the box. Yes those are the same numbers that are on the handsets I have here. They are wired differently, but can be easily converted to work with the Racal radios.

Bruce wrote: Bruce, it should be in the manual. Look for the Audio socket connections diagram. F is earpiece A microphone C PTT switch D common return for all those I did buy some handsets from