开云体育

Once any of the processes (qngateway, qnlink and qnitap) dies, systemd will attempt to restart them, but this won't go on forever. It will eventually give up and you'll see messages about this in the

Hi Tom, Thank you very much for your feedback. The day after I send my post, I upgraded the firmware of my ID-4100 to the one which was also mentioned in your reply. And you are right, now it works

I don't know anything about using a MAX232 in place of the Icom USB to serial converter cable. I'm afraid you are on your own with that. All I can tell you is the Icom cable requires a baud rate of

Hi Tom, I still have performance issues, no matter what I tried. I use the Terminal mode and tried it with the ID-4100 and ID-31Plus. As an SBC I use the OrangePi Zero but have also tried it with a

Yes. It is now.

Fantastic news, Tom!? Thanks.? Is that change in the QNetIcomGateway build?

I finally got around to adding automatic re-linking to qnlink and pushed up to the master branch. Please see the explanation on how it works in the linking section of the OPERATING file.

I'm confident I have TAP modes working as good as is possible given the lack of documentation from Icom. It is very reliable now and I believe it works better than the current release of

Thanks Tom! I will fire this up when I get home tonight. Excellent work. :)

I will try the new code this evenibg Cheers Carty

I think I finally got to the bottom of the problem with TAP modes. I'm suppose to wait until I get an "all clear, ready for the next packet" message before I send the next packet. From what I can

The solution is to place the .dat file in the 4100 folder on the microSD card. Carty Sent from Mail for Windows 10 Sent: Monday, January 6, 2020 4:39 PM To: [email protected] Subject:

Still nothing. 4100 says “ –no file –” Windows sees the file. This what I tried first. The zipped file gave same result. I give. Carty Sent from Mail for Windows 10 Sent:

Carty Unzip the file first, and put the file that is the result of the unzip process on the SD card. Colby Sent: Monday, January 6, 2020 15:41 To: [email protected] Subject: Re:

Carty, have you tried clearing the card using diskpart in windows? After step 6 put the sd card back in the radio and let the radio format the card. *Step 1:*Type*cmd*?in the search box in Windows

Thanks for the tip on the possible update. I still have not been able to get the radio see the update file. I can see it - format SD card in radio, put .zip file on card and when I go to the radio

Well, about an hour after posting the previous message, I suffered the dreaded "mute bug" where things look just fine in the log, but no audio is heard. This bug usually takes a long time to show

What about putting a thermal switch in series with the fan? As the temperature rises to a specified level the fan would turn on. Otherwise it would remain off and silent.

I decided on the lowest current that could drive the 4100 to full output, in case I want to to AP Mode. An MJF-4115 was $79. It's pretty small, but the fan noise is a bit more than I would like. The

Good job Tom, What power supply did you pick to use for the 4100 and do you think you would set it up to run the it in access mode? Will