开云体育

Thanks. I'll try that.

There are a couple of options: * You can use the log sub-menu within ./qnadmin. * "sudo journalctl -u qnitap -f" (or qnlink or qngateway). * Install some helpers. From the build directory, do "cp

Are there any specific logs I can watch with a "tail -f"? I typically connect via Putty, although I do occasionally go the direct route and switch my monitor over to the Pi. I love troubleshooting,

The real problem is that ICOM has refused to release the details of protocol used for data communication over the digital cable used when the radio is in Terminal or Access Point Mode. Open source

This is a more general issue related to 'Terminal / Access Point Mode.' My experience is with Icom's software, Pi-Star, and QnetGateway; and the ID-51A+2, the ID-4100, and the IC-9700. Using any of

My setup: Running ID-51a+2 in terminal mode, RPi 3B, QnetGateway software. The situation: The HT is connected directly to the Pi via USB. Sometimes when I turn off the HT then turn it back on at a

I will start a new thread so the original topic is not drowned out

Fred, Your situation doesn't sound similar to me. I need more info please. Why do you say you need to restart everything? Did all three apps lock up? What was in the logs? Tom

Not to hijack the thread, sometimes I have to restart qnitap, qnlink, and qngateway. Hoping I will see something that will fit in my situation as it is similar.

No worries.? I was a little curious as to how I would send "_______AX" when I had no connection to QnetGateway.

Sorry, that won't work! Not firing on all 4 cylinders this morning!

I'll look into this this weekend, if I get a chance. In the meantime you can always create a new script that will just restart QnetITAP, call it exec_A.sh: #!/bin/sh systemctl restart qnitap Put

I have been operating my several Icom radios in Terminal/Access Point mode for quite a while.? I recently started using QnetGateway for this as it runs nicely on a tiny Pi Zero W.? Every D-Star

Thank you, Tom! I wondered if that was a group, but didn’t find it. Will move the conversation to there. 73 Sent: Saturday, August 24, 2019 1:26 PM To: [email protected] Subject: Re:

We have a separate group for discussing the Smart Group Server at quadnet.groups.io/g/SmartGroupServer/ ( https://quadnet.groups.io/g/SmartGroupServer/ ). This is a sub-group of

UDP 40000

Ok Dan, Keep us updated. The team will help where we can. 73 Will / W4WWM

Whatever it was, it seems to be resolved.? Working great.? Remaining questions is which ports should I open on the firewall where I'm running smart-group-server. 73 Dan W4DTO

This may have been a fat-finger issue in the sgs.cfg file. I was just able to connect to the group. I will update this thread when I’m able to confirm whether it is working or not.

I'm trying to set up a new smart group server on a Digital Ocean VM.? I've got the server installed and running, and my new group is showing up on https://www.openquad.net/groups.php, but we aren't