开云体育

Thanks for the link Steve. 73 Colin

Hi Steve, I spotted the mistake, but Phillip G4JVF was the first to publish it, so the thanks should go to him, on a different subject I now have the Ultimate QRSS chip V 1.3 (thank you to you and

Hi Guys, There is a top band digital group here :- TBD160@yahoogroups.**com <TBD160%40yahoogroups.com> but not much traffic. 73s steve

Hi Phillip many thanks for your reply, yes I had spotted the mistake on the slip of paper I have built a couple of BPF's so it didn't look right ( note to Steve the info about the wrongly labled slip

Colin, Thanks for the note on the mislabelled caps. You are right. I'll correct the slips. 73s Steve

Hi Colin I built one and it works very well...running last night in fact... Not had any problems with the osc starting up though.. Few things I timkered with.. I couldnt get enough FSK shift with

Hi Kevin, thanks for your reply, yes its the old one I have always wanted to do something on top band I thought this would be a good way to start, I will give your idea a try this weekend. Vy 73 de

Hi Kurt, What frequency band is "medfer" ? Steve

Hans, I know he is referring to the old kit. I sold it to him! Steve

"Hi, has anyone else built this one? I can not get the Xtal to oscillate all..." How low in frequency can the 160m model go? Any chance of using it as a MedFER beacon? Kurt

we dont sell a 160 m ultimate beacon....yet! I have to test it first. 73s Steve

Hi Another thing one could try assuming its the older QRSS TX, not the new multimode one, is to bypass the collector resistor of the oscillator transistor. A 100nF capacitor across that resistor may

Many thanks for your relpy Chris, I will try that out.

More likely to need a bit more feedback? try some capacitance ~30pF? from base to emitter or base to collector. Or across other oscillator components. It may kick-start. Sent from Chris McW's

Hi, has anyone else built this one? I can not get the Xtal to oscillate all componants are in the right place with values checked and correct, no dry joints or solder splashes, number of turns on L1

It's working.... Thanks for all the help both on the group and also the direct e-mails. I've just got to box it up now and put it on air to test. I've tried all modes in the shack with the TX fed

Phillip, That is very encouraging. When I have the time I am thinking of a couple of modifications for mine. Remote mounting of the GPS is a good idea. Firstly, to save power, I was going to try

My Ultimate QRSS rig has now run for 76 hours without problems using WSPR mode.. It's been using a 10AH lead acid battery for power and today, it measured 11.3 Volts on the terminals, a drop from 12.4

Re: QRSS Ultimate 30. I have uploaded a series of test notes, observations, etc. to the "Files" area under "G8OQW". All notes are in txt format and appear packaged with any

Many thanks Stephen, you've already processed the updated chip for me as confirmed by your shop system. I included the remark to indicate the locator calculation had occurred but to acknowledge the