开云体育

Steve: Just load the M6Start Macro and put a carriage return between the two lines and resave it, then things will run.. Fixed for next version... Thanks, Art www.artofcnc.ca

Sorry Steve, I quickly zeroed them . Fix the M6Start Macro by removng the offending line and all should be fine. I didn't want a toolchange to do anything other than just change tool in turn until I

Lee: It was only the M93, there was none in the macro directory, so it halted everything. It now ignores unknown macro's. (rc12). Thanks, Art www.artofcnc.ca

Thanks Servo: Will Fx... Art www.artofcnc.ca

Mach12 lathe Now got a different macro bug! "Error in Macro at Line Tool = Get Selected tool () Set Current Tool (tool)" Hangs there, won't load graphics or file. M5 end macro is blank - M6 Start

wrote: N106G0G90G54X0.Y2.7969A0.S5000M93G4P2 N106 line number G0 ??? no parms..If this is modal maybe it saying the following are to be rapid until mode changed ??? G90 set ABS positioning G54 Work

Art, Mach2 RC12 requires the run command to be executed twice after a tool change verses once with all previous releases. Servo

Yes I agree now. Its what the CAM program generated. I'm dissecting it and playing around with it. I dont get the G0 with no parms. I'm not a GCODE expert,but I will be soon:-), I was hoping the CAM

Because there are so many of them. Over half the world market at one point. And because they are so versatile, they can be married to so many different types and brands of machines. Despite the

You got a whole Russian novel on one line. Break it up into smaller logical chunks. Especially the dwell dg Message: 21 Date: Sat, 23 Aug 2003 23:11:08 -0000 From: "Lee Studley" <indigo_red@...>

Hi All: RC12 is online. It is being released a bit early because I didn't like that MAcro bug being present. 1) DXF has selectable return position in abs or rel. 2) Rgen button is locked out during

Lee: Just a side note, the lockup of the G-Code program on that line does not ocur with the next release. It was related to a bug Steve found in Version 10.0 onwards. It loads and runs just like Mach1

Thank you to everyone for your thoughtful help on this problem - there is a small glitch with my LEDs, but everything [that matters] works great. Today was the first time I operated my system - which

I see your point in the rapids, and the limits thing was something Steve, I found it as you say with acrobat search. This code was cranked out by a professional cam program and was working fine on

Art, Thanks, I will check it in the morning. Bob Campbell

What is a "standard Fanuc"? is it a mill, is it lathe, what version? Why, oh why, does everybody seem to think "Fanuc" is a standard? With a mill - there is V6, 11, 18 & 21 With a lathe - there is V0,

Bob: Oh, I see the problem. With switches you simply press reset and the switch is overriden until you jog off of it. With softlimits, you should be able to jog the other way. Is the system somehow

Hi Art, I finally got around to loading up Mach2 and I've been having problems. Mach1 runs fine( with its caveats) This code is from a standard FANUC postprocessor. This is a portion of a file that

Art, I got it working. Bob Campbell

Art, What is the proper procedure to back off limits. I am not using an external switch. My main concerned is the use of one of my systems at a local high school. Bob Campbell