开云体育

Hi, Art said to ask questions here. Ok, I am looking for a schematic that uses the PWM signal from Mach2 to control the spindle RPM. Anybody? Thanks.

Just downloaded trial version of mach2 release one If I export a dfx file from corel 9 and convert it to g code nothing visual shows in tool path, only a red box and a tangent line. If I generate a g

Rab: Sounds doable. Very hard to do in current code base. I'll give it some thought. Souns like what is needed is a G30 Wizard to do the digitizing of a particular shape instead of the usual

Hi Rab: Is on my list for next release.... Sorry for the delay, I thought it was working... Thanks, Art www.artofcnc.ca

Jeff, The MS9307C+ (USB) does not have onboard video. It has been my experience that boards with onboard LAN and video can be kind of QUIRKY due to the shared memory. Graphics adapter cards work from

Servo, Are you using the onboard video on the motherboard you suggested? Jeff E. <servowizard@y...> wrote: seller to

Hi everyone The files section has a PDF of the latest revision of the Mach2Mill manual i.e. Revision A2 (actually A2.3) which supports Mach2Mill Release 1.0. It should now be accessible via the link

I showed my setup to a total neophyte the other day, explaining what is does, the best I could in 15 minutes, and the first question he asked was if the program could learn a routine from jogged

Good suggestion, especially #1 in Turn, oh yeah! :>) Doug M.

Hi Art, If you're doing any more work on the digitizing functions, could I please put in some requests; 1. Teach Mode - Jog the machine around a part and press a button, either on the keyboard or an

Hi Art, could you take a look at the LoadRun call if you get a chance, still dosn't seem to be loading up the file, Rab

Servo I am always interested in info on new motherboards. Jim

Everyone, Thanks for your responses, I sure would like to know what motherboard suggestions you have. Thanks Again Jeff <servowizard@y...> wrote: point you towards a new mainboard that works very well

Hi, The mainboard is manufactured by Matsonic and the model number is MS9307C+(USB). The mainboards are currently available on eBay for $49.??, just search for (9307C+), include the parentheses. The

I certainly would :) Im about to put a system together myself ...

Jeff, Would you be interested in a mainboard suggestion? If so I can point you towards a new mainboard that works very well with Mach2 and it is very reasonably priced. Servo ja_erickson

Hi Jeff: Unfortunately, its a "usually" type of answer. Earlier integrated video boards did not turn off their on-board systems well. Later boards were much better. I prefer a board with no video on

Evening Art, I am going to purchase a new motherboard specifically for for my c.n.c. project and was wondering what issues there are in regards to onboard video. I have read some posts that mentioned

John: The allowable range of Macro's on the next version is 99999, also the repeat function is repaired. I found I had forgotten to change an int to a double. (Simple stuff like that drives me crazy.

Tom: You can't use the digitizer from the OCX as yet, I need to add some hooks. But there is a OCX ref. file in the files section I think.... I will be collating the OCX data very soon and will