开云体育

Is it possible that you have the Kernel speed HZ set to high?

I spent hours trying to get mach4 to work with ess. Boy is the configuration a confusing mess. two things i just can't get to work but i am sure there will be others once i test my lube control and

so why are we the only lucky ones. i have broken two $20 new router bits so far.

I have the same problem since I fitted ESS a month or two ago to my Mach3 setup. It happens when I use the high speed jog (Shift Up,Down, Left, Right,PgUp, PgDn). So far it has only happened on

the most annoying thing is that when jogging with the keyboard i use small steps with a single click of the hotkey for an axis and use shift to do a fast move. not very often but occasionally the

What is your machine doing? Are you running faster then before? Maybe a loose wire? I have used Mach 3 sense it was master CNC and can’t see a reason to change. If your having problem with you

I had a similar problem a few years ago with Mach 3 and almost tore my hair out trying to figure out what the problem was. I checked everything mechanical to no avail. Someone suggested copying the

Mach4 with the ESS is a lot less buggy than Mach3, in my experience. If I had to give a number, I would say Mach4 has maybe 5% as many bugs as Mach2. I much prefer Mach4, it's much easier to

I have been using mach3 for many years. i am recently having strange behavior occasionally and breaking tools. just goes wacky now and then so i have to keep my hand on estop all the time and can not

I'm using version Version R3.043.066 Anyone have any idea why the Elapsed time clock would stop during a job? I have had the issue for a long time (many years) but could never figure out why it was

It is operating as before but, is quieter than the old days on Yahoo. All members and the old archives were moved here. There is also a web based forum being run by Machsupport themselves. It

Is this still the main channel for MachCNC posts? Seems awfully quiet here... Roland

Jonathan Thatcher, please rsvp to my email metlcutr55@... so I don’t bombard the group with repetitions thanks Ken Sent from Mail for Windows 10 Sent: Wednesday, March 10, 2021 10:32 AM To:

<spencer@...> wrote: I wouldn't suggest that those items are worthless. The big kicker is your consumables availability and cost. Regards

No worries. Unfortunately, I do not have the knowledge to suggest a machine to fit your needs. Roger

as i said i did a quick look. it seems that google showed a lot of hits that were not for the 60, had to look deeper to see the price range. i don't think i need much, not sure what i am even going

I see the A40 for less but the A60 is more like $2500 when I look.

I don't know if there are variations or if you are including a lot of consumables etc but my quick search suggests you can buy the cutter new for less than what you? are asking. i have been

Hmm. $1750 for the A60 and 300 for the MP3000DTHC.

How much?